1
Base Station
Passive Infra-Red (PIR)
Motion Sensor
Swivel Bushing
Rubber Pads
Batteries: If the DC adapter is not connected, the
AA batteries in the Base Station should last up to one week.
If the Base Station batteries are low, the Base Station will
beep every 30 minutes. The AA batteries in the PIR Motion
Sensor will last up to 2 years depending on use (lithium
batteries are recommended for colder environments). If
the PIR Motion Sensor batteries are low, the Base Station
will beep every 30 minutes until the batteries are replaced.
The PIR Motion Sensor will continue to operate with a
low battery, however the light will not illuminate. For peak
performance, inspect batteries annually and replace as
needed.
Programming Additional PIR Motion Sensors: The Base
Station can learn the code of up to 7 additional PIR Motion
Sensors, responding with unique buzzes. To program
additional PIR Motion Sensors see Step 4.
To order additional PIR Motion Sensors call
1-800-528-9131.
Clear Memory: Press and hold the Learn Button on the Base
Station until 3 beeps are heard.
On/Off: To turn the Base Station on and off, hold down the
power button until you hear the on/off tone.
Volume: The Base Station is equipped with adjustable
volume controls. The lowest volume setting is the mute
feature.
Carton Inventory
Antenna
On/Off Button
Volume
BASE STATION
Operation & Features
Overview
Mounting Plate
DC Adapter
(9 Vdc @ 200mA)
Sun/Rain Shield
The Wireless Motion Alert uses a Passive Infra-Red (PIR) Motion Sensor to detect movement of people and vehicles, while allowing
small animals to pass through undetected. The Base Station is powered by the DC adapter and the 4 AA batteries supply power in case
of a power outage.
NOTE: The Base Station is intended for indoor use only.
®
Models CWA2000 & CWA2000C
WIRELESS MOTION ALERT
Loading ...
Loading ...
Loading ...
