Loading ...
Loading ...
Loading ...
If you prefer to cancel the programmed start-up time, press the (B) key again until all the delay lights
have switched off.
Time remaining to end of cycle or programme phase display (V).
Models with this feature display the APPROXIMATE ti me remaining to the end of the programme in
minutes, or the current wash phase of the programme set. The prog ramme times may vary depending
on the temperature selected, ambient temperature, mains water pressure, the quantity and type of
washing.
“Door lock” lamp (G).
The door lamp flashes when a wash programme starts, and then burns steadily. From that moment on
the door is locked (DOOR LOCK).
The DOOR LOCK lamp remains on during the whole wash cycle, thus preventing the door from
opening.
At the end of the wash cycle, the safety devices are deactivated, the light goes out and the door can
then be opened.
Cancel-change programs
Once you have started a program, and wish to change or cancel it, you should pro ceed in the follow ing
manner,
- Put the program selector in the OFF position. At that instant, you have cancelled the program and
can if you wish to do so, select a new one.
- Select the new program.
- Press the (H) key until one of the programme phase lights turns on.
The washing machine will perform the new selected program.
Programme Pause
To pause the wash programme so that more washing can be added, proceed as follows:
- Press the (H) key until the lights on the option keys and the programme phase light have turned on.
- When the Door Lock lamp goes out (after approx. 2 minutes), open the door and put the additional
washing into the drum.
- Close the drum door and the lid properly.
- Press the start key (H), the time remaining lamp will light up and the machine will continue with the
programme.
At the end of the programme, all the programme phase lights will be lit up, and sa fety door ligh t will
shut off.
For your own safety, set the programme selector to OFF before opening the washing-machine
lid and the drum doors to remove the washing.
24.10.08/ H-46005006 EN
Loading ...
Loading ...