Loading ...
Loading ...
Loading ...
9
● LIGHT Button: This controls the LED cabinet light.
NOTE: Once the light is turned on, it will shut off automatically after 10 minutes.
● °C/°F Button: Converts the temperature display to Celsius or Fahrenheit.
● ON/OFF Button: This turns the unit on or off. Press once to start the unit; press
again to turn it off.
To view the SET temperature for either chamber at any time, press SET button
once. The SET temperature will flash in the LED display for 5 seconds, then the
display will show the internal temperature of the chamber once again.
Temperature memory function: In the event of a power interruption, all previous
temperature settings will be restored once the power returns.
NOTES:
1. This wine cooler has a delay protection feature. Once the unit has lost power
or is turned off, the compressor will start to work again only after a period of
3 to 5 minutes after power is restored.
2. When you use the wine cooler for the first time, or restart the wine cooler
after it has been shut off for a long time, there could be a few degrees
variation between the temperature you select and the one indicated on the
LED readout. This is normal and is due to the length of the inactivation time.
Once the wine cooler has been running for a few hours, it should operate
normally.
Door Lock
This unit can be secured with a lock and key. The keys are located inside the
plastic bag that contains the Owner’s Manual. Insert the key into the lock at the
bottom of the door and turn it counter-clockwise to lock the door, making sure the
metal pin is engaged completely. To unlock the door, do the reverse. Remove the
key and put it in a secure location.
Defrosting
The wine cooler defrosts automatically during its operating cycle. The water
resulting from the defrosting is collected in a drip tray near the compressor at the
back where it is automatically evaporated. During the defrosting operation, the
displayed temperature may be higher than the set temperature.
Loading ...
Loading ...
Loading ...