User Manual Insignia NS-SPBTBRICK-C Portable Bluetooth Speaker

• User Manual - (English)
• Quick Setup Guide - (Spanish)

Table of contents

• FEATURES
• CHARGING YOUR SPEAKER
• CHARGING AN EXTERNAL DEVICE
• TURNING YOUR SPEAKER ON AND OFF
• CONNECTING WITH BLUETOOTH
• RECONNECTING TO A PAIRED DEVICE
• LISTENING TO MUSIC
• PLAYING MUSIC FROM AN EXTERNAL SOUND SOURCE
• TAKING A CALL
• RESETTING THE SPEAKER
• TROUBLESHOOTING

Portable Bluetooth Speaker User Manual

FEATURES

• Wirelessly stream from any Bluetooth device
• Rechargeable battery lasts up to 30 hours
• Integrated power bank charges your mobile devices
• Water-resistant body

Top view

Back view

CHARGING YOUR SPEAKER

1. Connect the small end of the charging cable to the micro USB port on the back of your speaker.
2. Connect the other end to a USB port on your computer.

Note: When the battery is low, you will hear beeps. About five minutes later, the speaker will power off automatically.

CHARGING AN EXTERNAL DEVICE

1. Open the port cover on the back of the speaker.
2. Plug one end of a USB cable into your external device and the other end into the DC OUT port on the speaker.
3. Switch the ON/OFF switch to . Your external device is being charged.

TURNING YOUR SPEAKER ON AND OFF

• Slide the ON/OFF to ON. The LED indicator blinks quickly and the speaker enters pairing mode.

CONNECTING WITH BLUETOOTH

1. Make sure that your Bluetooth device is turned on and within 33 feet meters) of your speaker.
2. On your speaker, press and hold the button. Your speaker enters pairing mode, and the LED on your speaker blinks. Your speaker remains in pairing mode until it pairs with a Bluetooth device.
   • Note: Press and hold the button to return to pairing mode.
3. Turn on your Bluetooth device and turn on Bluetooth. Set your device to pairing mode, then select NS-SPBTBRICK. See the instructions that came with your Bluetooth device for information about pairing.
4. If you are asked for a password, enter 0000. When pairing is complete, the LED on your speaker lights solid blue.
5. To disconnect from the paired Bluetooth device, press and hold the button on your speaker for three seconds. You will hear a beep. Your speaker disconnects from the Bluetooth device and enters pairing mode again.

RECONNECTING TO A PAIRED DEVICE

When your speaker is not paired to a device, the LED blinks blue.

Notes:

• If a device does not automatically reconnect, you may need to reselect NS-SPBTBRICK on your Bluetooth device.
• If you move your device out of range, it will remain paired for 10 minutes, but no sound will come from the speaker until you come back within range. After minutes, the speaker will reenter pairing mode.

LISTENING TO MUSIC

1. Slide the ON/OFF switch to ON, then connect to your Bluetooth device.
2. Begin playback on your Bluetooth device.
3. Adjust the volume on your speaker by pressing the + or - buttons. Note: Press the to start playback. Press the and to go to the next or previous track.

PLAYING MUSIC FROM AN EXTERNAL SOUND SOURCE

1. Connect an external sound source, such as an MP3 player, by plugging an audio cable with a 3.5 mm plug (not included) into the AUX IN jack on the right side of your speaker.

Notes:

• When an AUX cable is connected, Bluetooth goes into standby mode. To play music from your Bluetooth device, press play () on the speaker or your Bluetooth device. To return to AUX mode, press pause or stop on the speaker or your Bluetooth device.
• When playing music via audio cable, you should pause the Bluetooth sound source paired to your speaker or disconnect the Bluetooth device.

2. Start playback on the external device.

3. Press + or – to adjust the volume.

4. Control playback using the controls on the external device.

TAKING A CALL

1. Press the button briefly to accept an incoming call.
OR
Press and hold the button to reject an incoming call.
2. Press the button during a call to end the call.

RESETTING THE SPEAKER

Caution: This will remove all paired Bluetooth devices.

• Turn on the speaker, then press and hold the previous button () and the volume up + buttons at the same time for approximately five seconds. You will hear a warning tone and LED indicator will blink, then power off.

TROUBLESHOOTING

SAFETY INSTRUCTIONS

• Never expose the product to fire as this could result in personal injury.
• Do not store the product in an extremely cold or warm environment.
• Never dismantle the product.
• Never let children play with the product.
• Do not expose the product to dampness or moisture.
• The product should not be exposed to dripping or splashing