Loading ...
Loading ...
Loading ...
31-2000021 Rev. 3 7
Installation Instructions
ELECTRICAL CONNECTIONS
A
When making the wire connections, use the entire
length of conduit provided. The conduit must not
be shortened.
B
With the cooktop in place, open the front of the
cabinet door.
C
Insert the wires from the conduit through
the opening of the junction box.
The conduit strain relief clamp must be securely
attached to the junction box and the flexible conduit
must be securely attached to the clamp.
THREE-CONDUCTOR BRANCH
CIRCUIT CONNECTION
When connecting to a three-conductor branch circuit,
if local codes permit:
D
Connect the
cooktop green
ground con duc tor
lead to the
branch circuit
ground (green)
using a wire nut.
E
Connect the
cooktop red lead
to the branch
circuit red lead in ac cor dance with local codes,
using a wire nut.
F
Connect the cooktop black lead to the branch
circuit black lead in ac cor dance with local codes,
using a wire nut. If the residence red, black or
white leads are aluminum conductors, see
WARNING.
G
Install Junction Box Cover.
NEW CONSTRUCTION AND BRANCH
CIRCUIT CONNECTION
• When installing in new construction, or
• When installing in a mobile home, or
• When installing in a recreational vehicle, or
• When local codes do not permit grounding through
neutral:
D
Attach the appliance grounding lead (green or
bare copper) in accordance with local codes. If
the residence grounding conductor is aluminum,
see WARNING.
E
Connect the red
and black leads
from the cooktop
conduit to the
corresponding
leads in the
junction box.
Connect the ground wire.
F
Once the connections are
made, secure wires together
using wire nuts.
G
Install Junction Box Cover.
Ground and
Neutral Wires
Junction Box Cover
Ground
Wire
Junction
Box Cover
Strain
Relief
Strain
Relief
Clamp
Black
Red
Ground
Black
Red
Ground wire
location
Strain
Relief
Clamp
Black
Red
Ground
WARNING
Improper connection of
alu mi num house wiring to copper leads can
result in an electrical hazard or fire. Use only
con nec tors designed for joining copper to
aluminum and follow the manufacturer’s
recom mend ed procedure closely.
Loading ...
Loading ...
Loading ...