Loading ...
Loading ...
Loading ...
10
OPERATING YOUR WINE CHILLER
It is recommended you install the appliance in a place where the ambient temperature is between 72-
78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 40-65 degrees Fahrenheit may
not be reached. Your wine chiller is designed to operate with at a range of 40º - 65º F (5 – 18ºC).
Recommended Temperatures for Chilling Wine.
Red Wines 58 - 65 ºF 14 - 18 ºC
Rose Wines 49 - 51 ºF 9 - 11 ºC
Dry / White Wines 48 - 57 ºF 10 - 13 ºC
Sparkling Wines 40 - 47 ºF 5 - 8 ºC
Wine Chiller Control Panel
ON/OFF POWER
To turn ON or OFF the appliance, press the button/mark and hold for 3 seconds.
SETTING THE TEMPERATURE CONTROL (Model WCF51S3SS)
First press the button. The numbers in the display window will flash, You can press and
buttons/marks to control the internal temperature .
The degrees indicators will appear in the display window.
The temperature that you desire to set will increase 1ºF or 1ºC if you push the
button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the
button/mark once.
SETTING THE TEMPERATURE CONTROL (WCF43S3SD)
First press the button, the display for the lower zone will flash indicating that you are setting the
temperature for the lower zone, press again the display for the upper zone will flash indicating that
you are setting the temperature for the upper zone.
The numbers in the display window will flash, You can press and buttons/marks to control
the internal temperature .
The degrees indicators will appear in the display window.
The temperature that you desire to set will increase 1ºF or 1ºC if you push the
button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the
button/mark once.
NOTE:
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Wine Chiller will not start.
When you use the wine chiller for the first time or restart the wine chiller after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout. This is normal and it is due to the length of the activation
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC
button/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature
display window.
Loading ...
Loading ...
Loading ...