Loading ...
Loading ...
Loading ...
7) Tilt the appliance backwards by no more than 45°.
8) Remove the lower hinge by unscrewing the screws.
9) Attach the lower hinge to the opposite side using the screws.
10) Re-attach the door by sitting the door on the bottom hinge.
11) Attach the top hinge/screws from step 2 to the opposite side and
secure the door by the top hinge.
NOTE: Ensure that all screws have been tightened securely.
IMPORTANT: Check that the door opens and shuts correctly,
without fouling, after you have completed the door reversal
process.
After the door has been reversed, you should check
the door seal of the appliance. The seal should not be
creased or crushed; otherwise there will be a gap
between it and the inside of the door.
o The seal must adhere properly all the way around the door.
o If the seal is not adhering to the cabinet properly, then you should
either:-
1. Use a warm damp cloth and manipulate the seal until it does
adhere to the cabinet properly, all the way around the door.
OR
2. Use a hair dryer on its lowest heat setting and lightly heat the
areas of the door seal that are not adhering correctly. The heat
19
Loading ...
Loading ...
Loading ...