Loading ...
Loading ...
Loading ...
RIGHT REAR
(1)
(3)
(2)
(4)
LEFT REAR
(6)
(5)
(6)
(4) rear axle nut
(5) rear axle shaft
(6) chain adjusters
(1) rear brake adjusting nut
(2) brake rod
(3) brake arm
98
Rear Wheel Removal
Wheels
Servicing Your Honda
Removal
Raise the rear wheel off the ground by
placing a maintenance stand or support block
under the engine. Secure the front of the
motorcycle with tie-down straps.
Remove the rear brake adjusting nut ( ),
disconnect the brake rod ( ) from the brake
arm ( ) by pushing down on the rear brake
pedal.
Take care to prevent getting grease, oil, or
dirt on the brake shoe surfaces. This can
cause poor brake performance or rapid brake
shoe wear after reassembly.
Unscrew the rear axle nut. Pull the rear axle
shaft out. Push the wheel forward and derail
the drive chain from the rear sprocket.
Remove the wheel and side collar.
Turn both chain adjusters ( ) so the rear
wheel can be moved all the way forward for
maximum drive chain slack.
Loosen the rear axle nut ( ) while holding
the rear axle shaft ( ).
1.
2.
3.
4.
5.
1
5
2
4
6
3
12/07/10 10:51:59 31KPT690_107
Loading ...
Loading ...
Loading ...