Loading ...
Loading ...
Loading ...
29
Ic
H
Ib
Ia
H: Cleaning filters for
ground coffee: Ensure that
the holes in the filter are
free from coffee grounds.
If necessary, clean them
with a small brush
Ia/Ib/Ic)To clean the residual milk from the steam
nozzle (8), first wait for the nozzle to cool to prevent
burning. Then remove the extractable steam nozzle
protection (12) by gently pulling on it and alternately
turning it to the right and to the left. Clean the side
hole of the steam nozzle protection (12) with a
toothpick, then wash it thoroughly inside and
outside. Use a damp sponge to remove the remaining
milk from the nozzle (8). Clean the hole of the steam
nozzle (8) with a toothpick (see the cleaning and
maintenance sector). Use a damp sponge to remove
the remaining milk from the nozzle (8) and from the
protection device (12). Use the steam knob (10) to
open the steam tap and to let the steam or drops of
water escape for a few seconds (2-3). Reconnect the
protection device (12) on the steam nozzle (10).
14) Every time you fill up the water into the tank
(2), remember to empty the waste water tank
located under the drip grid (14).
L. Cleaning the brewing
unit (9) and its gasket.
Regularly clean the gasket
under the brewing unit (9)
with a wet brush (Figure L)
in order to remove all
coffee residues. The gasket
must be cleaned all the
time
®
Cleaning and maintenance
Before cleaning the machine, turn the main switch to the OFF position and remove the plug from the
socket. Wait for the machine to cool. The appliance must be cleaned with a freshly dampened non-abrasive
cloth soaked with a few drops of neutral non-corrosive detergent (never use solvents). After using the
machine always clean the filter and filter holders and wipe the stainless-steel surface of the filter holder
and of the brewing unit with a damp cloth.
Loading ...
Loading ...
Loading ...