Loading ...
Loading ...
Loading ...
7
• Hang the creased garment on a clothes hanger.
• Pull the garment tight with one hand far from steaming area and place the appliance on the
creased area, beginning at the top of the garment.
As steam is very hot: never attempt to remove creases from a garment while it is
being worn, always hang garments on a clothes hanger.
• For steam, apply press on steam trigger. - fig.8.
• The combination of steam and fabric brush will gently remove the creases.
• After treatment, let the garment cool down on the hanger before wearing.
Tips: Check the fabric’s label for recommendations. We recommend that you test fabrics
in an inconspicuous area to ensure these fabrics are not damaged by hot steam.
Do not touch silk or velvet with steam head. Some articles can be steamed better from
inside. Heavier fabrics may require repeated steaming. Exercise caution at all times. To
avoid damage on clothes, keep a distance of 1.5 inches between the steam head and the
fabrics. We recommend that before the first use or after the appliance has been stored
for some time to test the burst of steam on an old garment.
Lint pad
The lint pad must not be used when attached to appliance.
Threads, lint and hair can easily be removed with the lint pad by brushing the clothes slowly up
& down.
The pad can be cleaned by brushing in the opposite direction down & up on a piece of old cloth.
Warning: Never store the appliance until the steam head and unit cools completely.
• Unplug the appliance. Empty the water remaining in the tank and leave unit on its side to cool.
After the appliance has cooled down (minimum one hour), it may be stored in the bag provided
or hang by rear hook.
Warning: never forget to unplug the steam brush and empty the water in horizontal
position after your ironing session. While not in use, you can hang your steambrush
by its hook. Wait for an hour before hanging.
Please note that water can come out of the inlet cover if you hanging it vertically.
AFTER USE
Loading ...
Loading ...
Loading ...