Loading ...
Loading ...
Loading ...
12
INSTALLING COIN SLIDE AND COIN BOX
The coin slide mechanism, service door lock and key, and coin
box lock and key are not included with some models, but can
be obtained from the usual industry sources.
Remove the service door of the meter case by lifting it up
at the back. Install the money-accepting device. (Refer to
manufacturer’s instructions for proper installation.)
A ground connection is needed for the coin slide, which can be
made by connecting the available harness (W10846503) to the
coin slide.
Install a lock and cam on the meter case service door. Install
the coin vault with lock and key in the meter case opening.
Ground
connection
q
Check electrical requirements. Be sure that you have
the correct electrical supply and the recommended
grounding method.
COMPLETE INSTALLATION
q
Check that all parts are now installed. If there is an extra part,
go back through steps to see what was skipped.
q Check that you have all of your tools.
q Check that shipping materials were completely removed
from washer.
q Dispose of/recycle all packaging materials.
q Check that the water faucets are on.
q Check for leaks around faucets and inlet hoses.
q Remove lm from console and any tape remaining on
washer.
q Plug into a grounded outlet or connect power.
q Check that circuit breaker is not tripped or fuse is not blown.
q
Start the washer using the payment system if used and
check that the washer completes the cycle without a fault
or water leak.
TYPICAL FULL LOAD SIZES
Load Type Loading Suggestion Load Type Loading Suggestion
Mixed Load 3 double sheets
4 pillowcases
6 pair shorts
8 T-shirts
2 shirts
2 blouses
8 handkerchiefs
Heavy Work Clothes 3 pair pants
3 shirts
1 coverall
4 pair jeans
1 overall
Permanent Press 2 double or
1 king size sheet
1 tablecloth
1 dress
1 blouse
2 slacks
3 shirts
2 pillowcases
Knits 3 blouses
4 slacks
6 shirts
4 tops
4 dresses
Loading ...
Loading ...
Loading ...