Loading ...
Loading ...
Loading ...
(323,1)
北米Model "A2550BE-B" EDITED: 2019/ 1/ 16
X-MODE indicator
To activate:
Press the X-MODE switch. While the X-
MODE is activated, the X-MODE indicator
appears.
To deactivate:
Press the X-MODE switch again. The X-
MODE indicator will disappear when the X-
MODE is deactivated.
NOTE
. Even if you try to activate the X-
MODE by pressing the X-MODE switch
when the vehicle speed is 12 mph (20
km/h) or more, the X-MODE will not be
activated. At this time, a buzzer will
sound twice.
. If the vehicle speed reaches 25 mph
(40 km/h) or more while the X-MODE is
activated, a buzzer will sound once and
the X-MODE will be deactivated.
. While the engine is running, if any of
the following conditions is met, the X-
MODE will be deactivated. In this case,
it is not possible to activate the X-
MODE.
– The CHECK ENGINE warning
light/malfunction indicator light illu-
minates.
– The AT OIL TEMP warning light
flashes.
– The ABS warning light illumi-
nates.
– The Vehicle Dynamics Control
warning light illuminates.
. If the engine could overheat because
of a temperature increase of the engine
coolant, it may not be possible to
activate the X-MODE. Even while the
X-MODE is activated, the X-MODE will
be deactivated when the engine coolant
temperature increases.
& Hill descent control function
S07BI03
The hill descent control function will be in
standby mode when the X-MODE is
activated and the vehicle speed is less
than approximately 12 mph (20 km/h).
The function will operate when the vehicle
speed is less than approximately 12 mph
(20 km/h) and the accelerator ratio is less
than approximately 10%.
The function will turn off when the vehicle
speed is more than approximately 12 mph
(20 km/h) and the accelerator pedal is
depressed.
CAUTION
The braking power of the hill des-
cent control function may not be
sufficient when strong braking
power is needed (e.g., when towing
a trailer (Outback)).
NOTE
. Even while the hill descent control
function is operating, you can vary the
vehicle speed by using the brake pedal
or accelerator pedal.
. During braking by the hill descent
control function, the hill descent con-
trol indicator will flash.
. The hill descent control function is
operable regardless of the gradient of
the road.
. The hill descent control function
may be considered normal when the
following conditions occur.
– An operating sound is heard
briefly from the engine compart-
– CONTINUED –
Starting and operating/X-MODE (Outback)
7-37
7
Loading ...
Loading ...
Loading ...