Loading ...
Loading ...
Loading ...
Main Body x 1
Screw Pack with 4 screws x 1
Feet with castors x 2
Assembly Instructions
Before using this appliance, it must have the castor plates with castors fitted. The
screw pack to attach the feet to your appliance will be taped to either one of the feet
for your appliance, or taped to the plug.
WARNING: Heater must not be used without the feet, castors, wheels
fitted.
This appliance has been supplied with ‘1 way screws’ for permanent installation of the
feet. This is a safety requirement for the New Zealand and Australian market.
ASSEMBLY OF HEATER
Carefully turn the Main Body upside-down on a scratch-free and stable surface. Be careful to
prevent damage to the cosmetic finish or your floor surfacing. Align the 2 holes in the foot with
the 2 holes in the base of the appliance, place screws in the centre of the holes and atta ch firmly
with a screwdriver. Repeat for other foot. Turn the appliance the right way up.
WARNING: Operate the appliance in normal upright position only with
wheel assemblies attached to the bottom. Any other position could create a
hazardous situation.
Loading ...
Loading ...
Loading ...