Loading ...
Loading ...
Loading ...
21
Wired connection
Connect to the router by using the Ethernet
cable
1 Select [Yes], when asked whether to set
up network connection (see ‘First-time
setup’).
2 Use an Ethernet cable to connect the unit
to the router.
Connect to the home Wi-Fi/wired network
On the unit, select [Wired (Ethernet)].
» The unit starts to acquire an IP address
assigned by the network automatically.
» A message appears when the
connection is completed successfully.
NP3900
LAN4To Modem12V=1A ResetLAN3 LAN2 LAN1
Consult the user manual of the router.
Or, to check for the settings of the router,
enter the IP address (e.g. 192.168.1.1) in
the web browser (e.g. Internet Explorer)
of the computer, and then, get the
desired information in the setup page.
Enter the IP address manually
On the NP3900, enter an IP address that
allows the unit to be in the same subnet
as the router.
For example, if the router has
IP address: 192.168.1.1, Subnet mask:
255.255.255.000;
Then, enter the following on the unit:
IP address: 192.168.1.XX (where XX
denotes a number), Subnet mask:
255.255.255.000.
Press / repeatedly to select the entry
location;
To enter the desired digits, use the
alphanumeric buttons on the remote
control; or press
/ repeatedly.
Note
Ensure that you never enter an IP address that
is already assigned to a computer/device on
the network.
EN
Loading ...
Loading ...
Loading ...