Loading ...
Loading ...
Loading ...
How to Install Your Alarm
Direct Plug Alarm To install:
1. Choose a standard 120V unswitched outlet to
plug the alarm into.
2. Pull the yellow tab to activate the battery
backup.
3. Plug the alarm into the outlet.
CAUTION: Do not rotate the alarm while it is
plugged into an outlet, as damage to plug may result.
Important Labels Provided
Two labels have been provided that have important information on what
to do in case of an alarm. Add the phone number of your emergency
service provider in the space provided. Place one label next to the alarm
after it is mounted, and one label near a fresh air source such as a door
or window.
4. Installation Instructions
Direct Plug-In
5. Alarm Characteristics
Carbon Monoxide Alarm Indicator
When the alarm senses a dangerous level of CO, the unit will emit a
loud alarm pattern. The alarm pattern is 4 quick beeps followed by 5
seconds of silence. This cycle repeats as long as a dangerous CO condi-
tions exist. The red Alarm LED will flash the same pattern.
WARNING: When powered by battery backup only; after four minutes,
the alarm will sound and flash only once every minute, until the alarm is
reset or the CO is eliminated.
2519-7201-03(820-1281 Rev B)_da.qxd:_ 2011.1.25 2:19 PM
Loading ...
Loading ...
Loading ...