Loading ...
Loading ...
Loading ...
22
Operation
Ice is lumped together
When ice is lumped together, take the ice lumps out of the ice storage bin,
break them into small pieces, and then place them into the ice storage bin
again.
When the ice maker produces too small or lumped together ice, the amount
of water supplied to the ice maker need to adjusted. Contact the service
center.
❈ If ice is not used frequently, it may lump together.
Power failure
Ice may drop into the freezer compartment. Take the ice storage bin out and
discard all the ice then dry it and place it back. After the machine is powered
again, crushed ice will be automatically selected.
The unit is newly installed
It takes about 12 hours for a newly installed refrigerator to make ice in the
freezer compartment.
When ice maker
does not operate
smoothly
1
1
Hold the ice maker cover with both hands and pull
it toward you while pressing the button on part (1).
How to
disassemble the
automatic
icemaker
- Do not disassemble the ice maker unless it is
necessary.
- Hold the ice storage bin using both hands so that it
does not fall.
- Do not touch the ice dispenser with your hand or tool.
- Because the ice maker can operate by opening the
freezer door, please take precaution.
- When you want to use the ice bucket space as the storage space, make sure
to use it by turning off the ice maker after removing the ice bucket.
The other
functions
Door open warning
The alarm will sound three times every 30 seconds if any door (Including
Home Bar) is left open or not closed properly for longer than 60 seconds.
Please contact with the local service center if warning continue to sound
even after closing the door.
Diagnosis (failure detection) function
Diagnosis function automatically detects failure when failure is found in
product during the use of refrigerator.
If a failure occurs in the product, it will not function correctly when any button
is selected. The display will not change regardless of what button or option is
selected, if this occurs DO NOT switch the unit it off as this will clear any
error codes and extend the time needed do diagnose the fault. Contact an
approved service center immediately.
WARNING
Loading ...
Loading ...
Loading ...