Loading ...
Loading ...
Loading ...
!
EN
17
indicator will flash momentarily and then
illuminate.
! A special safety device prevents the door
from being opened immediately after the
end of the cycle. Wait for 2 minutes after
the wash cycle has finished and the
DOOR LOCKED light has gone out before
opening the door. At the end of the cycle
turn the programme selector to OFF.
2) SPIN SPEED
This show the spin speed of the selected
programme that can be changed or omitted
by the relevant button.
spin speed cancelled.
3) WASH TEMPERATURE
This show the washing temperature of the
selected programme that can be changed
(where allowed) by the relevant button.
cold wash.
4) CYCLE DURATION
! When a programme is selected the
display automatically shows the cycle
duration, which can vary, depending on
the options selected.
! Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the wash.
! The appliance calculates the time to the
end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.
! If automatic washing/drying is selected, at
the end of the wash phase, the drying time
remaining to the end will be shown on the
display.
5) STAIN LEVEL
! Once the programme has been selected,
the indicator light will automatically show
the stain level set for that programme.
! Selecting a different stain level the
relevant indicator will light up.
6) EXTRA RINSES
The indicator lights show the extra rinses
selected by the relevant button.
7) OPTIONS
The indicator lights show the options that
can be selected by the relevant buttons.
8) Wi-Fi (some models only)
! In the models with the Wi-Fi option, the
icon indicates that the Wi-Fi system is
working.
! For all other information in the Wi-Fi
system, there is a specific manual inside
the machine.
9) DELAY START
This flashes when delay start has been set.
10) Kg Check (function active only on
Cotton and Synthetics programmes)
! For the programmes where the "Kg
Check" function is active, the appliance
in the first minutes it calculates the real
laundry loaded, updating the levels on the
display in real time.
If the door is not properly closed,
the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
delete. In this case, close the door
in the proper way and press the
START/PAUSE button.
Loading ...
Loading ...
Loading ...