Loading ...
Loading ...
Loading ...
4
AUTO SHUTOFF
• If the iron is motionless, it will switch o after about 30 seconds with the soleplate
• downwards, or about 8 minutes if the iron is stood on its heel. The power light will ash to
indicate this.
• To switch on again, lift it up, tilt it forward, then sit it upright to return to operating
• temperature.
• No settings are lost during auto shut-o.
PREPARATION
1. Check for textile care symbols (i j k l).
2. Iron fabrics needing low temperatures j rst, then those that need medium
temperatures k, and nish with those needing high temperatures l.
FILLING
You may use the iron with tap-water, but if you live in a hard water area, you should use distilled
water (not chemically descaled or softened water).
If you buy distilled water, check that it’s suitable for use in irons.
1. Unplug the iron.
2. Set the temperature control to •.
3. Open the cover.
4. Pour slowly, to let the air in the reservoir escape, otherwise you’ll cause an air lock and the
water will overow.
5. Don’t ll past max, or water will escape in use.
6. Wipe up any spillage.
SWITCH ON
1. Set the temperature control to •.
2. Sit the iron on its heel.
3. Put the plug into the power socket (switch the socket on, if it’s switchable). The light will
come on.
4. Turn the temperature control to bring the setting you want next to the mark.
TEMPERATURE SETTING GUIDE
Label marking Dot setting
j cool – nylon, acrylics, polyester
•
k warm – wool, polyester mixtures
••
l hot – cotton, linen
•••/max
i do not iron
-
If the instructions on the fabric label dier from this guide, follow the instructions on the label.
Loading ...
Loading ...
Loading ...