Loading ...
Loading ...
Loading ...
20
• If the machine encounters a fault during
operation, the associated fault will be
displayed.
“ ” : Water pressure sensing error
“ ” : Problem of overfilling water
“ ” : Door is not closed
“ ” : Over load in motor
“ ” : Over load in motor
“ ” : Water inlet trouble
“ ” : Drainage trouble
“ ” : Unbalanced load
“ ” : Water temperature trouble
“ ” : The washer experienced a power
failure.
If these error letters are displayed, please refer to
the troubleshooting page 25 and follow the guide.
Display
• When child lock is selected, the “ ” is
displayed.
• When time delay is selected, it shows the
remaining time until the finish of the
selected program.
• When washing cycle is completed,
“ ” is displayed on the “Multi display”.
• During the wash cycle, the remaining washing
time is displayed.
• Recommended program by manufacturer.
- Cotton : around 1 hour and 54 minutes
- Cotton Quick : around 1 hour and 26 minutes
- Synthetic : around 1 hour and 15 minutes
- Quick 30 : around 30 minutes
- Hand Wash/Wool : around 51 minutes
- Delicate : around 57 minutes
- Duvet : around 1 hour and 9 minutes
- Bulky : around 59 minutes
- Baby Care : around 1 hour and 54 minutes
- Bio Care : around 2 hours and 14 minutes
- Boiling Care : around 2 hours and 17 minutes
- Rinse+ Spin : around 20 minutes
- Spin : around 15 minutes
• The washing time may vary by the amount of
laundry, water pressure, water temperature and
other washing conditions.
• If an unbalanced load is detected or if the suds
removing program operates, the wash time will
be extended.
(Max. increasing time is 45 minutes.)
1. Special function Multi display
3. Completion of washing
4. Time left
2. Self diagnosis display
ow to use washer
H
Est. Time Remaining
Status Indicator
• This display shows the estimated time
remaining in the cycle when operating.
• This washer automatically detects the wash
load (weight) and optimizes the washing
time. After detecting, the display will show
the adjusted time remaining.
• These indicators flash to indicate what process
the machine is up to during the cycle.
(detecting, wash, rinse, spin )
Loading ...
Loading ...
Loading ...