Loading ...
Loading ...
Loading ...
10
• Turn the container over and place the accessory* (15b) in the slot of the dust separator support bolt (14) – Fig.25.
• Open by turning in the unlocking direction ( ) – Fig.26.
• Lift off the dust separator support (13) – Fig.27.
• Unclip then lift off the dust separator (12) taking care to do so in the unlocking direction ( ) – Fig.28
• Then place the dust container (10), the dust separator support (13) and the dust separator (12) in tap or soapy water
– Fig. 29.
• Dry them with a cloth – Fig. 30.
• Once it’s dry, replace then clip the dust separator (12) onto the dust separator support (13), following the locking di-
rection ( ) – Fig.31.
• Put them back on the dust container (10) – Fig.32.
• Place the accessory* (15b) in the slot of the dust separator support bolt (14) – Fig.25.
• Close following the locking direction ( ) – Fig.33.
• Clip the (H)EPA filter cassette (11) (black foam filter (11a) + (H)EPA filter (11b) ) in the container – Fig.24.
• Put the cover back (10b) – Fig.18-19 – and put the dust container back (10) in its compartment (6) – Fig.20.
4. CLEANING THE (H)EPA FILTER (11b)
The air we breathe contains particles that may be allergens: mite larvae and droppings, mould, pollen, smoke and ani-
mal residues (hair, skin, saliva, urine). The smallest particles penetrate deep into the respiratory system where they can
cause inflammation and lung impairment.(H)EPA filters (High Efficiency Particulate Air) are used to filter out the small-
est particles. With the (H)EPA filter, the air released back into the room is healthier than the air that is vacuumed.
Important!
Clean the (H)EPA filter cassette (11): black foam filter (11a) and (H)EPA (11b) filter every month.
• Remove the flexible hose (16) from the vacuum inlet (7) - Fig.2.
• Lift off the dust container (10) from its compartment (6) using the container’s unlocking clip (10a) – Fig.13-14.
• Pull simultaneously on the opening clips for the (H)EPA filter cassette (10d) - Fig.21.
• Separate the black foam filter (11a) from the (H)EPA filter (11b) - Fig.22.
• Turn the (H)EPA filter over (11b), and give it a tap over a dustbin - Fig.34.
• Then scrape the filter with the accessory* (15b) under some warm water, then allow the (H)EPA filter to dry for
24hours - Fig.35.
• Once it’s completely dry, assemble the (H)EPA filter cassette (11): black foam filter (11a) and (H)EPA filter (11b)
under the dust container (10) - Fig.24, then put the dust container back in its compartment (6) - Fig.20.
• Make sure that the (H)EPA filter (11b) is completely dry before putting it back in the appliance.
Important! Make sure that the whole filtration system is correctly in place before starting the appliance.
5. REPLACING THE FILTRATION SYSTEM (Ref. XC0047 01)
• Remove the flexible hose (16) from the vacuum inlet (7) - Fig.2.
• Lift off the dust container (10) from its compartment (6) using the container’s unlocking clip (10a) – Fig.13-14.
5.1. HEPA FILTER CASSETTE (11)
• Pull simultaneously on the opening clips for the (H)EPA filter cassette (10d) – Fig.21.
• Separate the black foam filter (11a) from the (H)EPA filter (11b) - Fig.22.
• If the (H)EPA filter cassette (11) (black foam filter (11a) and (H)EPA filter (11b)) is damaged, throw it into the bin -
Fig.36 and replace it with a new (H)EPA filter cassette (ref. XC0047 01).
• Assemble the (H)EPA filter cassette (11): black foam filter (11a) and (H)EPA filter (11b) under the container
(10) - Fig.24 then put the dust container back in its compartment (6) - Fig.20.
5.2. FOAM MICROFILTER (9)
• Remove the foam microfilter* (9) - Fig.37.
• Throw the microfilter foam* (9) into the bin - Fig.38.
• Place a new foam microfilter* (9) (ref. XC0047 01) into its housing - Fig.39
• Make sure that the foam microfilter is correctly positioned* (9) before putting the dust container back(10).
CLEANING THE VACUUM CLEANER
• Wipe the body of the appliance and the accessories with a soft and damp cloth, then dry.
• Wipe the cover with a dry cloth - Fig.40.
• Do not use detergents, chemical or abrasive products.
Depending on models: either equipment specific to certain models or available as an optional accessory.
902872_TE_mini-space-cyclonic_902872 04/07/11 10:40 Page10
Loading ...
Loading ...
Loading ...