Loading ...
Loading ...
Loading ...
168
If You Have a Flat Tire
Taking Care of the Unexpected
Remove the front axle bolt ( ), and
then loosen the right and left axle pinch
bolts ( ).
Remove the front axle shaft ( ), wheel
and side collars.
Avoid pressing the brake lever when
the wheel is off the motorcycle. This
will force the caliper pistons out of
the cylinders. The result will be loss
of brake fluid. If this occurs, the
brake system will require service. See
your dealer for this service.
Avoid getting grease, oil, or dirt on
the disc or pad surfaces. Any
contamination can cause poor brake
performance or rapid pad wear after
reassembly.
To avoid damage to the brake hose
during removal, support the caliper
assembly so that it doesn’t hang from
the hose. Do not twist the brake hose.
Remove the fixing bolts ( ) and
remove the left brake caliper assembly
( ) from the fork leg ( ).
Carefully raise the center of the
motorcycle with a chain hoist.
3.
4.
5
4
5. 6
32
1
2.
１０／０８／２７ １７：４６：３５ ３１ＭＦＲ６１０ ０１７７
Loading ...
Loading ...
Loading ...