Loading ...
Loading ...
Loading ...
4 BISSELL.com
Using Your Vacuum
For additional ways to use your vacuum’s features, check out support.BISSELL.com.
Above Floor Cleaning
Visit support.BISSELL.com to see all the ways you can use your vacuum’s tools.
1. Turn power ON. Turn the
Brush Roll ON for carpet
cleaning and the light switch
will illuminate. Turn the Brush
Roll OFF when vacuuming hard
or delicate surfaces.
2. Step gently on base and pull
the handle back to recline.
Note: The Brush Roll
automatically shuts OFF when
vacuum is locked in upright
position. Recline to reactivate.
3. Use the Carpet Type Control
for optimized cleaning on high
pile and low pile carpet. The
control can be moved to the
middle position for medium
pile carpeting.
1. Push the Lift-Off Release
Button and lift up to remove
the pod from the Foot.
2. For the most reach, use
the Quick Release Extension
Wand. Push the Release
Button to remove.
To clean without the the
wand, twist circular hose cuff
counter-clockwise and remove.
3. Attach desired tool.
Note: For optimal use, attach
the Pet TurboEraser® Tool
directly to the Hose instead of
the Handle.
4. Use the Carry Handle to
bring the Lift-Off Pod to hard-
to-clean places in your home.
5. Replace the wand back by
sliding into place until you hear
a “click”. Reattach Hose to
Handle if needed.
6. Place the pod back onto the
Foot.
WARNING Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
Loading ...
Loading ...
Loading ...