Loading ...
Loading ...
Loading ...
6
2. Using the Wireless Speakers
The JBL Bar 5.1 features two wireless surround speakers that
transform the soundbar to a full 5.1 surround sound experience.
The soundbar system will reproduce the experience you hear in the
movie theater and create an immersive music experience.
How to use your wireless surround speakers:
1. Detach the speakers from the main soundbar and freely place
them to the sides or behind the main seating area.
2. Note that the narrow side of the speaker emits the sound. Point
this side towards the listening location.
3. The wireless surround speaker volume level is set to a default
setting. Press the WIRELESS SURROUND +/- buttons on the
remote control to adjust the surround speaker volume level
4. Review the “Audio Calibration” section to calibrate the wireless
speaker system to your specic speaker placement and room
orientation.
Surround Speaker LED Lighting Indication
• WHITE (Solid) : Connected
• WHITE (Slow Blinking) : Lost connection
• WHITE (Fast Blinking) : Searching for soundbar
• RED (Solid) : Charging
• RED (Blinking) : Low battery
Battery and Charging
• Each wireless surround speaker features 10 hours of playtime.
• Each wireless surround speaker will reach a charge in less than
3 hours of charging.
• Each wireless surround speaker will charge when attached to the
soundbar and the system is in STANDBY mode. The surround
speakers will stop charging when the soundbar is power ON.
• As an option, each wireless surround speaker can charge via the
USB connector, located on the bottom of the speaker.
Speaker charging
Standby Mode
1. The wireless surround speakers feature standby mode. In this
condition the speakers should automatically reconnect to the
main soundbar without any other action.
2. The wireless surround speakers automatically enter standby for
a total of 10 minutes if one presses POWER OFF on the remote
control or the soundbar top-panel buttons.
3. The wireless surround speakers automatically switch to standby
after 10 minutes of button inactivity and no audio/video play from
a connected device.
4. The wireless surround speakers automatically power off after
20 minutes of button inactivity and no audio/video play from a
connected device.
Reconnecting to the Main Soundbar
To re-connect the wireless surround speakers to the soundbar,
rst conrm the main soundbar is POWER ON, then press the
RECONNECT button on the wireless surround speaker.
Reconnect to soundbar /
Power Off
3. How to use Bluetooth
2a. Press Bluetooth (BT) button on your remote control
to start Bluetooth pairing
PAIRING
2b. Choose “JBL Bar 5.1” to connect
CONNECTED
Settings Bluetooth
Bluetooth
DEVICES
JBL Bar 5.1
Now Discoverable
Connected
Loading ...
Loading ...
Loading ...