Loading ...
Loading ...
Loading ...
Installation Instructions
Operating Instructions
Troubleshooting Tips
Consumer Support
Safety Instructions
www.GEAppliances.ca
25
7KH([WHULRUWipe or dust any spills or washing
compounds with a damp cloth. Dryer control
panel and ¿nishes may Ee damaged Ey some
laundry pretreatment soil and stain remover
products. Apply these products away from the
dryer. The faEric may then Ee washed and dried
normally. Damage to your dryer caused Ey
these products is not covered Ey your warranty.
The Lint Filter: Clean the
lint ¿lter Eefore each use.
Pull out the lint ¿lter.
0oisten your ¿ngers and
remove the captured lint.
Once clean, slide the ¿lter
Eack into position. Have a
Tuali¿ed technician vacuum
the lint from the dryer once a year.
Loading and using the dryer
Always follow the fabric manufacturer’s care label when laundering.
Sorting and Loading Hints
Care and Cleaning of the Dryer
As a general rule, if clothes are sorted properly for
the washer, they are sorted properly for the dryer.
Try also to sort items according to si]e. For example,
do not dry a sheet with socks or other
small items.
Do not add fabric softener sheets once the load
has become warm. They may cause fabric softener
stains. Bounce
®
Fabric Conditioner Dryer Sheets have
been approved for use in all GE Dryers when used
in accordance with the manufacturer’s instructions.
'RQRWRYHUORDGThis wastes energy and causes
wrinkling.
Do not dry the following items: ¿berglass items
woolens rubbercoated items plastics items with
plastic trim and foam¿lled items.
7KH([KDXVW'XFWInspect and clean the exhaust
ducting at least once a year to prevent clogging.
A partially clogged exhaust can lengthen the
drying time.
Follow these steps:
Stainless Steel: To clean stainless steel surfaces,
use a damp cloth with a mild, non-aErasive cleaner
suitaEle for stainless steel surfaces. Remove the
cleaner residue, and then dry with a clean cloth.
7KH([KDXVW+RRGCheck with a mirror that
the inside Àaps of the hood move freely when
operating. 0ake sure that there is no wildlife
Eirds, insects, etc. nesting inside the duct or hood.
Turn off electrical supply Ey disconnecting
the plug from the wall socket.
Disconnect the duct from the dryer.
Vacuum the duct with the hose attachment
and reconnect the duct.
1
2
3
Loading ...
Loading ...
Loading ...