Loading ...
Loading ...
Loading ...
wolfappliance.com | 11
Troubleshooting
IMPORTANT NOTE: If the range does not operate properly,
follow these troubleshooting steps:
• Verify electrical power is supplied to the range.
• Verify the gas supply shut-o valve is in the open
position.
• If the range does not operate properly, contact Wolf
Factory Certified Service. Do not attempt to repair the
range. Wolf is not responsible for service required to
correct a faulty installation.
Door Alignment
To adjust the door, follow these steps:
1 Remove the skirt by extracting the screws.
2 Open the door, and loosen the nut. Refer to the
illustration below.
3 Close the door, and turn the screw clockwise to raise
and counterclockwise to lower the door.
4 Open the door, and tighten the nut.
5 Close the door, and reinstall the skirt.
NUT
SKIRT
ADJUSTMENT
SCREW
Door alignment
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.
Installation
Loading ...
Loading ...
Loading ...