© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
PT9000_12_UM_V2.0
Register your product and get support at
www.philips.com/welcome
PT9000
EN User manual
DA Brugervejledning
DE Benutzerhandbuch
ES Manual del usuario
FR Mode d’emploi
IT Manuale utente
NL Gebruiksaanwijzing
SV Användarhandbok
Contents
1 Important 5
Important Safety Instructions 5
Notice 8
2 Your portable TV 10
Introduction 10
What’s in the box 10
Overview of the main unit 11
Overview of the remote control 13
3 Connect 16
Connect TV antenna 16
Connect power 16
Connect a USB device 17
Connect an SD card 17
Connect an external device 18
4 Get started 19
Charge the bulit-in battery 19
Install remote control battery 20
Install the stand 21
Use the Home menu 21
Set time and date 22
First time settings 22
Manual search 23
5 Watch TV 25
Turn on 25
Switch channels 25
Adjust volume level 25
View program information (DTV) 25
Use the electronic program guide (DTV) 26
Manage channels (DTV) 26
Play options 27
4 EN
6 Use more of your player 28
Play music 28
Play photos 28
Play DivX video 29
Display a theme clock 30
Use the counter 30
Set the alarm timer 30
Watch connected devices 31
7 Adjust settings 32
8 Mount the set 34
Test TV reception quality 34
Preparation 34
Mounting the set 35
9 Product information 37
Product information 37
USB playability information 37
10 Troubleshooting 39
5
1 Important
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
h Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
i For countries with a polarized mains, do not defeat the safety
purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
Caution: To prevent electric shock, match the wide blade of the plug
to the wide slot, fully insert.
j Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
k Only use attachments/accessories specified by the manufacturer.
l Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
English
EN
6
m Unplug this apparatus during lightning storms or when unused for
long periods of time.
n Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
o Batteries (battery pack or batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
p Apparatus shall not be exposed to dripping or splashing.
q Do not place any sources of danger on the apparatus (e.g. liquid
filled objects, lighted candles).
r Where the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
Warning
Never remove the casing of this apparatus. •
Never lubricate any part of this apparatus. •
Never place this apparatus on other electrical equipment. •
Keep this apparatus away from direct sunlight, naked flames or heat. •
Never look into the laser beam inside this apparatus. •
Ensure that you always have easy access to the power cord, plug or adaptor to •
disconnect this apparatus from the power.
EN
7
Hearing safety
Listen at a moderate volume.
Using headphones at a high volume can impair your hearing. This •
product can produce sounds in decibel ranges that may cause hearing
loss for a normal person, even for exposure less than a minute. The
higher decibel ranges are offered for those that may have already
experienced some hearing loss.
Sound can be deceiving. Over time your hearing ‘comfort level’ •
adapts to higher volumes of sound. So after prolonged listening, what
sounds ‘normal’ can actually be loud and harmful to your hearing. To
guard against this, set your volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
Set your volume control at a low setting. •
Slowly increase the sound until you can hear it comfortably and •
clearly, without distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even at normally ‘safe’ levels, can also •
cause hearing loss.
Be sure to use your equipment reasonably and take appropriate •
breaks.
Be sure to observe the following guidelines when using your
headphones.
Listen at reasonable volumes for reasonable periods of time.•
Be careful not to adjust the volume as your hearing adapts.•
Do not turn up the volume so high that you can’t hear what’s around •
you.
You should use caution or temporarily discontinue use in potentially •
hazardous situations. Do not use headphones while operating a
motorized vehicle, cycling, skateboarding, etc.; it may create a traffic
hazard and is illegal in many areas.
English
EN
8
Notice
Any changes or modifications made to this device that are not expressly
approved by Philips Consumer Lifestyle may void the user’s authority to
operate the equipment.
This product complies with the radio interference requirements of the
European Community.
Environmental information
All unnecessary packaging has been omitted. We have tried to make
the packaging easy to separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
batteries and old equipment.
Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert innkoplet. Den innebygde
netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet
nettkontakten.
For å redusere faren for brann eller elektrisk støt, skal apparatet ikke
utsettes for regn eller fuktighet.
Recycling
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When you see the crossed-out wheel bin symbol attached to a product, it
means the product is covered by the European Directive 2002/96/EC:
EN
9
Never dispose of your product with other household waste. Please inform
yourself about the local rules on the separate collection of electrical
and electronic products. The correct disposal of your old product helps
prevent potentially negative consequences on the environment and human
health.
Your product contains batteries covered by the European Directive
2006/66/EC, which cannot be disposed of with normal household waste.
Please inform yourself about the local rules on separate collection of
batteries. The correct disposal of batteries helps prevent potentially
negative consequences on the environment and human health.
Always bring your product to a professional to remove the built-in battery.
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be
an infringement of copyrights and constitute a criminal offence. This
equipment should not be used for such purposes.
Recording and playback of material might require consent. See Copyright
Act 1956 and The Performer’s Protection Acts 1958 to 1972.
ABOUT DIVX VIDEO: DivX
®
is a digital video format created by DivX,
Inc. This is an official DivX Certified device that plays DivX video. Visit
www.divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
®
device must
be registered in order to play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD section in the
device setup menu. Go to vod.divx.com with this code to complete the
registration process and learn more about DivX VOD.
DivX
®
, DivX Certified
®
and associated logos are registered trademarks of
DivX, Inc. and are used under license.
English
EN
10
2 Your portable TV
Congratulations on your purchase, and welcome to Philips! To fully benefit
from the support that Philips offers, register your product at www.philips.
com/welcome.
Introduction
With the portable TV, you can enjoy digital television with extra program
content.
What’s in the box
Check and identify the contents of your package:
1 x Portable TV•
1 x Remote control•
1 x AC power adapter, SP-01A1201000-V•
1 x AV cable•
1 x Antenna•
1 x Antenna converter•
1 x Base stand•
1 x Mounting arm•
4 x Mounting screws•
1 x User manual•
1 x Quick start guide•
EN
11
Overview of the main unit
a Display panel
b SET
Sets a counter.•
c START
Starts/stops a counter.•
HOME
b
a
p
o
n
m
l
k
j
c
d
e
f
g
i
h
q
English
EN
12
d CH /
Switches to the next or previous channel.•
Navigates menus.•
e HOME
Selects the home menu.•
f VOL+/-
Increases or decreases volume.•
g
/OK
Confirms an entry or selection.•
Switches to standby or switches on from standby.•
h ANTENNA
Antenna jack. •
i Stand slot
j POWERON/OFF
Turns on/off the unit.•
k 12V DC IN
Power supply socket.•
l AV IN
Audio/video input jack.•
m
Headphone jack.•
n ON/CHR
Charging indicator. •
o SD card slot
p
Jack for a USB mass storage device.•
q Mounting hole
EN
13
Overview of the remote control
a
Switches to standby or switches on from standby. •
b SETUP
Selects or exits the setup menu.•
c USB/SD
Selects a USB/SD source.•
d AV-IN
Selects an AV input source. •
e
Toggles teletext on or off.•
a
b
c
e
g
d
f
h
i
j
p
q
r
s
t
v
w
u
k
l
m
n
o
English
EN
14
f , , ,
Navigates menus.•
,
Searches backward/forward at different speeds. •
Skips to the previous or next title, chapter, or track.•
Confirms an entry or selection.•
Accesses or exits the channel list.•
Starts or pauses play.•
g
Stop. •
h
/
Increases or decreases volume.•
i
Mutes or unmutes volume.•
j 0-9
Numeric keypad •
k
Rotates an image.•
l SET
Sets a counter.•
m Color keys
Selects tasks or options.•
Switches Teletext pages.•
n START
Starts/stops a counter.•
o
Switches the aspect ratio.•
p CH+, CH-
Switches to the next or previous channel.•
q
Displays program information, if available.•
r LIST
Accesses or exits the favorite list.•
EN
15
s EPG
Toggles the Electronic Program Guide (EPG) on or off. Enabled •
on digital channels only.
t OPTIONS
Accesses options relating to the current activity or selection.•
u CLOCK
Selects the clock mode.•
v DTV/RADIO
Selects the digital TV/Radio mode. •
w ATV
Selects the analog TV mode.•
English
EN
16
3 Connect
Make the following connections to use this product.
Connect TV antenna
You can connect the unit to the supplied antenna or home antenna (not
supplied) to receive TV program.
1 Connect the supplied antenna to the antenna jack.
Tip
For better reception, connect the set to home antenna. •
Connect power
1 Connect the supplied AC adaptor to the set and to the AC outlet.
EN
17
Connect a USB device
1 Connect a USB storage device to socket.
Connect an SD card
1 Connect an SD card to the SD card slot.
English
EN
18
Connect an external device
You can connect an external device to watch contents on the set.
1 Connect an external device to the set with AV cables.
Match the color of the AV cables (not supplied) with the jacks: the •
yellow cable is for the yellow video jack, the red/white cable is for the
red/white audio jacks.
AV OUT
EN
19
4 Get started
Caution
Use of controls or adjustments or performance of procedures other than herein •
may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of
this product. The model number and serial number are on the bottom of this
product. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Charge the bulit-in battery
Caution
Risk of product damage! Make sure that the power supply voltage corresponds to •
the voltage printed on the base of the set.
Use only the supplied AC adaptor to charge the battery.
•
Danger of explosion if battery is incorrectly replaced. Replace only with the same or •
equivalent type.
Note
The type plate is located under the stand of the set. •
Fast charge mode
To charge the set when it is powered off:
1 Slide the POWERON/OFF switch to the OFF position.
The set is powered off. »
2 Connect the supplied AC adaptor to the set and to the AC outlet.
English
EN
20
The charge indicator turns to orange. It takes less than four hours »
to fully charge the built-in battery.
When the built-in battery is fully charged, the charge indicator turns »
off.
To charge the set when it is switched to standby:
1 Slide the POWERON/OFF switch to the ON position.
The set is powered on. »
2 Press to switch the set to standby.
3 Connect the supplied AC adaptor to the set and to the AC outlet.
The charge indicator turns to orange. It takes less than four hours »
to fully charge the built-in battery.
When the built-in battery is fully charged, the charge indicator turns »
to red.
Slow charge mode
To charge the set when it is powered on:
1 Slide the POWERON/OFF switch to the ON position.
The set is powered on. »
2 Connect the supplied AC adaptor to the set and to the AC outlet.
The charge indicator turns to orange. It takes less than 15 hours to »
fully charge the built-in battery.
When the built-in battery is fully charged, the charge indicator turns »
to green.
Install remote control battery
Caution
Danger of explosion if battery is incorrectly replaced. Replace only with the same or •
equivalent type.
Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard
•
batteries in fire.
Risk of decreased battery life! Never mix different brands or types of batteries.
•
Risk of product damage! When the remote control is not used for long periods, •
remove the batteries.
EN
21
Note
Batteries contain chemical substances, they should be disposed of properly. •
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ •
hazardouswaste/perchlorate.
1 Open the battery compartment.
2 Insert one CR2025 battery with correct polarity (+/-) as indicated.
3 Close the battery compartment.
Install the stand
You can use the stand to place the TV set on a flat surface.
To install the stand:
1 Align the stand with the slot at the bottom of the set.
2 Fit the stand into the slot until it locks into place.
Use the Home menu
1 Press HOME to display the home menu.
To watch DTTV programs or listen to DTTV radio, select • [TV-
Digital].
To watch analog TV programs, select • [TV-Analog].
To browse and play files in a memory card, select • [SD card].
English
EN
22
To browse and play files in a USB storage device, select • [USB].
To watch a connected device, select • [AV-in].
To display a theme clock, select • [Clock].
To select the setup menu, select • [Setup].
Set time and date
1 Press HOME on the main unit.
2 Select [Setup].
The setup menu is displayed. »
3 Select [Clock].
The clock setup menu is displayed. »
4 Select [Sync time] > [Off].
To enable time synchronization, select • [Sync time] > [On].
5 Set time and date.
To set the time and date, select • [Set time]/[Set date].
To set the date and time format, select • [Set date format]/[Set
time format].
First time settings
Set up DTTV channels
1 Press DTV/RADIO to switch to the DTTV mode.
2 Press SETUP.
You are prompted to select your country. »
3 Press / to select your country, then press .
You are prompted to perform the auto channel search. »
4 Select [Auto search], then press .
Auto channel search starts. »
When auto channel search is complete, the total number of TV and »
radio channels found is displayed.
To view the programs of the first found channel, press »
.
EN
23
Set up analog TV channels
1 Press ATV to switch to the analog TV mode.
2 Press SETUP.
The analog TV setup menu is displayed. »
3 Select [Auto search], then press .
You are prompted to select your country. »
4 Press / to select your country, then press .
Auto search starts. »
When auto search is complete, the total number of analog TV »
channels is displayed.
To view the programs of the first found channel, press »
.
To change channels, press » CH +/- or CH
/ on the main unit.
Manual search
You can search TV channels manually.
Search DTTV channels manually
1 Press DTV/RADIO.
2 Press SETUP.
The setup menu is displayed. »
3 Select [DTTV] > [Manual search].
The manual search screen is displayed. »
4 Press to add new channels.
5 Select channel number, then press .
The manual search starts. »
The number of TV and radio channels found is displayed after the »
manual search ends.
To exit manual search, press » SETUP.
Search analog TV channels manually
1 Press ATV.
2 Press SETUP.
English
EN
24
The analog TV setup menu is displayed. »
3 Select [Manual search]>[Manual search].
4 Press .
The manual search starts. »
The number of available analog TV channels is displayed after the »
manual search ends.
To exit manual search, press » SETUP.
EN
25
5 Watch TV
Note
Before you start, ensure that you have connected the antenna to the set. •
Make sure you are in an area with sufficient signal coverage. You can check the signal •
coverage with the TV broadcast authority of your country or visit www.support.
philips.com.
Turn on
Slide the POWERON/OFF switch to the ON position.
Switch to standby
1 To switch the unit to standby mode, press on the main unit for 3
seconds
To switch on the unit from standby mode, press •
on the main
unit.
Switch channels
1 Press CH+/CH- or Number keys on the remote control.
You can also press • CH
/ on the main unit to switch channels.
Adjust volume level
Press • / to increase/decrease the volume level.
Press •
to mute/unmute sound.
View program information (DTV)
To view brief information of the current program, press .
To exit the program information page, press •
again.
English
EN
26
Tip
• : Program containing different audio languages. You can press OPTIONS to
access this function.
• : Program containing subtitles. You can press OPTIONS to access this function.
• : Program containing Teletext. You can press to access this function.
Access teletext
If the current channel has teletext available, is shown.
To access teletext, press •
.
Tip
The program may request using color keys to access or control the viewing features. •
Follow the instructions on the teletext screen.
Use the electronic program guide (DTV)
EPG is an on-screen guide available for digital TV programs. You can navigate,
select, and view programs by time or title.
1 Select a channel in the digital TV mode.
2 Press EPG.
The Electronic Program Guide menu is displayed. »
3 Press / to select a program.
4 Press .
The brief information of this program is displayed. »
5 To exit the EPG menu, press EPG.
Manage channels (DTV)
1 Press in the DTV mode.
The channel list is displayed. »
2 Select a channel.
To lock the channel, press the red button.•
EN
27
You are asked to enter the password (• 3308 by default).
To unlock the channel, press the red button.•
You are asked to enter the password (• 3308 by default).
To hide the channel, press the yellow button.•
To add the channel to your favorite list, press the green button.•
Play options
1 During play, press SETUP to select some play options.
2 Follow the on-screen instructions.
English
EN
28
6 Use more of your player
Play music
Note
Make sure that the USB/SD device contains playable audio contents for supported •
formats.
1 Connect a USB/SD device to the set.
2 Press USB/SD to select the USB/SD source.
3 Press / to select an audio file.
4 Press to start play.
To pause/resume play, press •
.
To select the previous or next audio file, press •
or .
To stop play, press•
.
To exit and return to the main menu, press • HOME on the main
unit.
Note
Philips does not guarantee compatibility with all USB/SD devices. •
NTFS (New Technology File System) data format is not supported. •
Play photos
Note
Make sure that the USB/SD device contains JEPG files. •
1 Connect a USB/SD device to the set.
2 Press USB/SD to select the USB/SD source.
3 Press / to select a JEPG file.
4 Press to start slide show.
EN
29
To pause/resume play, press • .
To view the previous or next photo, press •
or .
To stop play, press •
.
To rotate a photo, press •
.
To browse photos in the album view, press •
.
To exit and return to the main menu, press • HOME on the main
unit.
Play DivX video
DivX video is a digital media format that retains high quality despite a high
rate of compression. This set is DivX Ultra Certified so that you can enjoy
DivX video with additional feature support such as menus, multiple subtitles
and alternate audio tracks.
Note
Video rented or purchased through the DivX VOD (Video on Demand) service •
can be played only on the device to which it is registered. Enter this set’s DivX
registration code when you rent or purchase video from www.divx.com/vod.
This set can play DivX video files that are up to 4GB in size.
•
Always stop play before you disconnect a USB device. •
1 Connect a USB/SD device to the set.
2 Press USB/SD to select the USB/SD source.
3 Press / to select a DivX video file.
4 Press to start play.
To pause/resume play, press •
.
To start search within video, press •
or .
To stop play, press •
.
To exit and return to the main menu, press • HOME on the main
unit.
English
EN
30
Display a theme clock
Note
Make sure that have set the clock correctly. •
1 Press CLOCK.
The clock is displayed. »
To exit and return to the main menu, press » HOME on the main
unit.
Tip
You can view your photos with music in the clock display if you connect a USB/SD •
device with audio files and JEPG files to the set.
Use the counter
1 At any operation mode, press SET repeatedly to set the countdown
duration.
2 Press START.
The timer starts counting down. »
When countdown ends, the alarm rings. »
To stop the alarm, press » START.
Set the alarm timer
Note
Make sure that you set the clock correctly. •
1 Press SETUP.
The setup menu is displayed. »
EN
31
2 Select [Clock] > [Alarm] > [ON].
To turn off the alarm, select • [Off]
3 Select [Clock] > [Set Alarm Time].
4 Use the navigation keys to set the alarm timer and press to
confirm.
Watch connected devices
Note
Make sure that external devices are connected to the set and work normally. •
1 Turn on the connected device.
2 Press AV-IN.
The contents from the connected device is displayed. »
To change brightness and contrast settings, press » SETUP and select
[Brightness] or [Contrast].
To exit and return to the main menu, press » HOME on the main
unit.
English
EN
32
7 Adjust settings
Note
If the setup option is grayed out, it means that the setting cannot be changed at the •
current state.
To maximize your play experience, press SETUP to fine-tune your settings.
1 Press SETUP.
The setup menu is displayed. »
2 Use navigation keys to select an option and press to confirm.
[General]
[Language] Select on-screen display
language.
[DivX (VOD)] Get DivX registration code.
[DivX subtitles] Select DivX subtitle language.
[Set password] Change password.
[Factory settings] Restore factory settings.
[Video]
[Brightness] Adjust screen brightness.
[Contrast] Adjust screen contrast.
[ Audio]
[Downmix] Adjust down mix settings.
[Audio CH] Set audio output channel.
[DTTV]
[Auto search] Search channels automatically.
[Manual search] Search channels manually.
[DTTV Parental] Select parental options.
[Country] Select specific country.
[Time settings] Set time.
EN
33
[Clock]
[Set time] Set displayed time.
[Set date] Set displayed date.
[Set date format] Set date format.
[Set time format] Set time format.
[Sync time] Set time synchronization on/off.
[Alarm] Set alarm on/off.
[Set Alarm Time] Set alarm time.
[Photo]
[Frequency] Select intervals for JPEG play.
[Transition] Select the effect for slide show.
[Format] Select display format.
[Display] Select photo display mode.
[Version] Check the version information.
3 Press to go back to the previous menu.
4 Press SETUP to exit.
English
EN
34
8 Mount the set
You can mount the set under your kitchen cabinet.
Test TV reception quality
Caution
Test the TV reception before mounting the set under the kitchen cabinet. •
If the TV reception is poor, connect the main unit with a fix TV cable or buy an •
active antenna (PHILIPS SDV 2740, SDV 6122, SDV 2750).
1 Connect the supplied antenna to ANTENNA jack.
2 Place the main unit as close to open area or window as possible.
3 Adjust the place of the main unit until you get good signal reception.
Preparation
Note
Ask a friend or professional personnel to safely mount the product under your •
kitchen cabinet.
a. Find a mounting location near a wall outlet.
b. Use the mounting template to test the design and thickness of your kitchen
cabinet.
c. Decide whether you want to connect the set with other audio/video
equipment.
EN
35
Mounting the set
Warning
Install the set as far as possible from sources of interference, such as a refrigerator, •
microwave oven, fluorescent lamp, and so on.
Install the set on a board that is at least 15mm thick.
•
1 Find a spot near a wall outlet and an antenna jack.
2 Verify the correct mounting direction.
3 Attach the mounting arm to the mounting surface.
Make sure that the mounting plate is parallel to the mounting •
surface.
4 Fix the supplied screws vertically and firmly into the board.
5 Detach all the connections from the set.
English
EN
36
6 Align the mounting holes.
7 Hook the set onto the mounting arm until locked securely.
8 Make all the connections.
EN
37
9 Product information
Note
Product information is subject to change without prior notice. •
Product information
Dimensions 181.3 x 247.9 x 30.8 mm
Weight 0.88 kg
Power supply Input: AC 100-240V, 50/60 Hz
Output: DC 12V 1A
Power consumption
12W
Operating temperature range 0 - 40°C (32 - 104°F)
TV system DVB-T/Analogue TV
Speaker 2 x 1.5W (RMS)
USB 2.0
Card SD memory card
USB playability information
Compatible USB devices:
USB flash memory (USB 2.0 or USB 1.1) •
USB flash players (USB 2.0 or USB 1.1) •
memory cards (requires an additional card reader to work with this •
unit)
Supported formats:
USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 •
bytes)
MP3 bit rate (data rate): 32-320 Kbps and variable bit rate •
WMA v9 or earlier •
English
EN
38
Directory nesting up to a maximum of 8 levels •
Number of albums/ folders: maximum 99 •
Number of tracks/titles: maximum 999 •
ID3 tag v2.0 or later •
File name in Unicode UTF8 (maximum length: 128 bytes) •
Unsupported formats:
Empty albums: an empty album is an album that does not contain •
MP3/WMA files, and is not be shown in the display.
Unsupported file formats are skipped. For example, Word •
documents (.doc) or MP3 files with extension .dlf are ignored and
not played.
AAC, WAV, PCM audio files •
DRM protected WMA files (.wav, .m4a, .m4p, .mp4, .aac) •
WMA files in Lossless format •
EN
39
10 Troubleshooting
Warning
Never remove the casing of this apparatus. •
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following
points before requesting service. If the problem remains unsolved, go to
the Philips web site (www.philips.com/welcome). When you contact Philips,
ensure that the apparatus is nearby and the model number and serial number
are available.
No power
Ensure that both plugs of the mains cord are properly connected. •
Ensure that there is power at the AC outlet. •
Check if the built-in battery is drained. •
No response to the remote control
Ensure that the path between the remote control and the player is •
clear from obstacles.
From a close distance, point the remote control directly at the player. •
Replace the remote control batteries. •
The function does not work for this disc. Refer to the disc •
instructions.
No sound
Adjust the volume. •
TV reception with Black and White picture or no sound
Ensure that you set the TV system and TV sound correctly according •
to local TV broadcast specifications. If you do not know the
information, contact local TV broadcast authorities for help.
USB device not supported
The USB device is incompatible with the unit. Try another one. •
English
EN
40
Cannot display some files in USB device
The number of folders or files in the USB device has exceeded a •
certain limit. This phenomenon is not a malfunction.
The formats of these files are not supported. •
Timer does not work
Set the clock correctly. •
Switch on the timer. •
Clock/timer setting erased
Power has been interrupted or the power plug has been •
disconnected.
Reset the clock/timer. •
EN
