Loading ...
Loading ...
Loading ...
Window Installation Instructions
WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
1
18″ min.
30″ to 41″
(With accordion panels)
REMOVE THE AIR CONDITIONER
FROM THE CASE
Remove the inlet grille.
Remove the filter.
Remove the painted screws from each side
and the screw in the front. Save to reinstall
later.
Grasp the lower corners of the grille frame
while pressing in on the case side tabs with
your finger tips. Pull out to release and lift
it up.
NOTE: Do not pull the bottom edge toward
you more than 3″ or you may damage the
tabs of the grille.
D
C
B
A
3
STORM WINDOW REQUIREMENTS
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES–
WIDTH: 2″
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2″ higher than the top of the
storm window frame or the vinyl frame.
Attach securely with nails or screws
provided by the installer.
2
1/2″ higher
than storm
window
frame
Storm window
frame
Wood
Stool
1/2″ higher
than vinyl frame
(on some windows)
Vinyl frame
11
Screw
Screw
Screw
Loading ...
Loading ...
Loading ...