Loading ...
Loading ...
Loading ...
8
• Place the lid (C) on the juice collector (E) (pulp outlet to the rear). (see Fig. 3)
• Fit the 2 locking clips (H) on the lid (C). Make sure the 2 locking clips are properly
clipped to the lid. (see Fig. 4)
• Place the pulp collector (G) at the back of the appliance by tilting it forward slightly and
then sliding it under the lid (C). (see Fig. 5)
• If you want to separate the juice from the froth, insert the froth separator (M) in the
juice jug (N). Place the lid (L) on the juice jug (N). (see Fig.6a)
• Place the stainless steel grid (P) on the drip tray (Q). Place the assembled drip tray on
the Motor unit in the appropriate slot.
• Place the juice jug (N) under the spout at the front of the appliance. (see Fig. 6b)
• Plug the juicer in. The cord storage (R) lets you adjust the length of the cord.
What speed to use?
Ingredients Speed
Approximate weight
(kg)
Quantity of juice
obtained in ml (*)
1 glass = 200 ml
(approximately)
Apples
Pears
Carrots
Cucumbers
Pineapple
Grapes
Tomatoes
Celery
2
2
2
1
2
1
1
2
1
1
1
1 (about 2 cucumbers)
1
1
1.5
1.5
650
600
600
650
600
600
650
600
An inappropriate choice of speed can lead to the abnormal vibration of the unit.
(*) The quality and quantity of juice varies widely depending on the harvest date and
variety of each vegetable or fruit. The quantities above are therefore approximate.
• Turn on using the control button (I) and select the required speed.
• Introduce the prepared fruit or vegetables through the feeder tube (B).
Fruits and vegetables should be introduced with the motor running.
• Slide the food pusher (A) in the feeder tube (B) by aligning the groove with the small
notch on the side.
Do not push down on the food pusher too hard. Do not use any other utensil. Do NOT
push with your fingers.
• When you have finished, stop the appliance using the control button (I) and wait for
the filter to stop completely (D).
• When the pulp collector (G) is full or when the juice starts to flow more slowly, empty
the pulp collector (G) and clean the filter (D).
Loading ...
Loading ...
Loading ...