Loading ...
Loading ...
Loading ...
www.SerenLifeHome.com
6. Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits etc, in accordance with
these instructions and in the manner intended for the particular type of
power tool, taking into account the working conditions and the work to
be performed. Using the power tool for operations dierent from
intended could result in a hazardous situation.
8-9. Service
Have your power tool serviced by a qualied by qualied repair
personnel using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
10-11. Additional safety rules for blower vacs.
Always wear adequate protective clothing when operating the tool to
avoid injuries to face, eyes, hands, feet, head or hearing. Use safety
glasses or a face shield, high boots o r sturdy shoes, long trousers, work
gloves, a hard hat and ear defenders.
12. Do not start the tool when it is upside down or when it is not in
operating position.
13. Switch the motor o and remove the plug when the tool is not being
used, left unattended, being cleaned, being moved from one place to
another or when the extension cord is entangled or damaged
14. Do not operate the tool near people, especially children or pets. Turn it
o if they get too close. Maintain a safe distance of at least 5m from
other people when using the tool.
15. Never direct the blower tube towards bystanders or pets. Never blow
debris in the direction of bystanders or pets. The operator is responsible
for accidents or hazards occurring to other people or their property.
16. Do not handle the plug or the tool with wet hands and do not use the
tool in the rain.
17. Use only outdoor rated extension leads that are so marked. Keep the
extension cord away from heat, oil and sharp edges.
18. Ensure that the extension lead is secured in a manner that prevents it
form disconnecting from the plug whilst in use.
8
Loading ...
Loading ...
Loading ...