Loading ...
Loading ...
Loading ...
English 9
3. Attach the gun & hose hooks to the
handle.
Engine shipped without oil in
crankcase. Before starting engine, fill
with oil. Do not over-fill. Do not run the
engine wizth a high or low oil level as
this can cause engine damage. If you
have further questions regarding the
engine, please refer to the engine
manual included with the unit.
1. Turn the oil gauge dipstick counter
clockwise; remove it and clean it with
a clean cloth.
2. Fully reinsert the oil gauge dipstick
and pull it out to check the oil level.
3. If the oil level is halfway up the
dipstick or below, refill with SAE 10W-
30 oil through the dipstick hole until
the oil level reaches 3/4 up the dip-
stick or until it reaches the bottom lip
of the dipstick hole as shown.
Always use SAE 10W-30 oil.
Oil crankcase capacity: 0.6L.
4. Reposition the oil gauge dipstick and
tighten it by turning clockwise.
5. Engine oil should be changed after
the first 5 hours, then every 50 hours.
Make sure there is enough fuel in the
fuel tank before operating. This is a
4-cycle engine and does not require a
gas/oil mixture. There is a separate
reservoir for gas and a separate
reservoir for oil.
Preparation
Oil Level
Fuel Level
Loading ...
Loading ...
Loading ...