Loading ...
Loading ...
Loading ...
- 6 -
STEP 2
A. Fit the Olympic Bar (15) across the gap on top of the both Upright Frames
(1L/R) between the Upright Tube & Guide Rod (31) as shown.
NOTE: The Safety Hooks (55) and Barbell Holder Assemblies (4) should face inward;
Hang the Safety Hooks (55) onto the Safety Pin (41) at same level.
B. Adjusting the position of the Barbell Holder Assemblies (4) & Olympic Bar
Slider (5L/R) to match each other accordingly,
(Via matching process, set the
Stopper Hook (6L/R) under the Olympic Bar Slider (5L/R) to avoid falling down)
, and
then secured with the Allen Cylindrical Bolts(52) as shown.
C. Thread in the Bolts of both side Cables (43) to the Barbell Holder Assemblies
(4), Make Sure the Olympic Bar (15) Horizontally after mounting the Cables
(43), and then clip the Safety Buckles (8) onto the Barbell Holders (4).
Loading ...
Loading ...