Loading ...
Loading ...
Loading ...
15
TO DETACH THE FOOD
PROCESSING BOWL AND LID
Ensure the switch is released, power is
turned off at power point and the appliance
is unplugged.
Hold the motor body with one hand and
using thumb and finger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor body
away from the chopper bowl lid to detach.
TO DETACH THE GEARBOX
FROM THE LID
• To remove the gearbox grasp
the gearbox and lift up from the
processing lid.
ASSEMBLY & OPERATION
RECOMMENDATIONS WHEN USING
THE STICK MIXER WITH THE FOOD
PROCESSING BOWL
• Do not operate the stick mixer when the
food processing bowl is empty.
• The bottom of the food processing bowl
features a anti-slip rubber rim. This
keeps the food processing bowl stable,
however it is recommended during
processing to hold the motor body with
one hand and the food processing bowl
and lid with the other.
• When processing, cut food into uniform
sizes to ensure quicker, even and more
consistent results.
• The stick mixer blends foods and
liquids rapidly, therefore it is easy to
over process. Remember to check food
throughout the operation.
CAUTION
DO NOT process hard foods such as
coffee, grains or chocolate in lumps, as
damage to the blade may result.
DO NOT process boiling or hot foods in
the food processing bowl.
NEVER remove the blade from the bowl
before food processing is completed.
NOTE
When using the shredding or slicing
disc do not allow the processing bowl
to fill with food beyond the MAX level
indicated. Processing food beyond
this level could damage parts of the
bowl and lid
Loading ...
Loading ...
Loading ...