Loading ...
Loading ...
Loading ...
Do not use the Calc-Clean function when the steam generator is hot.
3 Use the Calc-Clean function as described above.
Always let the appliance cool down before you store it.
1 Place the iron on the iron platform.
2 Empty the water tank.
3 Pull out the cord & hose storage hook. (Fig. 20)
4 Secure the supply hose and mains cord (Fig. 21).
5 To move the appliance, carry it by the handgrips on either side of the steam
generator (Fig. 22).
- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 23).
If you need service or information or if you have a problem, please visit the Philips website at
or contact the Philips Consumer Care Centre in your country (you nd its
phone number in the worldwide guarantee leaet). If there is no Consumer Care Centre in your
country, go to your local Philips dealer.
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem Cause Solution
The appliance
does not become
hot.
There is a connection problem. Check the mains cord, the plug
and the wall socket.
You have not switched on the appliance. Press the on/off button.
The set temperature is too low. Set a higher temperature.
Smoke comes
out of my new
iron when I
switch it on.
Some parts of the appliance have been
lightly greased in the factory and may
initially give off some smoke when
heated.
This phenomenon is normal and
ceases after a short while.
The iron does
not produce any
steam.
There is not enough water in the water
tank.
Fill the water tank. See chapter
‘Preparing for use’, section ‘Filling
the detachable water tank’.
The steam generator has not heated up
sufciently.
Wait until the steam light stays on
continuously. This takes approx. 2
minutes.
11
4239.000.7740.1.indd 11 22-10-10 13:33
Loading ...
Loading ...
Loading ...