Loading ...
Loading ...
Loading ...
ENGLISH
45
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 24).
(Main unit) (Remote control unit)
w Set the input mode to “AUTO” or DTS.
2
Select the Dolby/DTS Surround mode.
(Remote control unit)
3
Play a program source with the , mark.
• The Dolby Digital indicator lights when
playing Dolby Digital sources.
DIGITAL
Light
23 2 2
1 1 3
4, 5, 6, 7, 8
3
5, 6, 7, 8
5, 6, 7, 8
5, 6, 7, 8
1
1
9
2
Playback with a digital input
• The DTS indicator lights when playing
DTS sources.
Light
4
Set the surround parameter according to the source.
First, press the SURROUND PARAMETER button.
(Remote control unit)
NOTE:
• Please make sure the “AUDIO”
position of the slide switch on the
remote control unit.
Example:
(Main unit) (Remote control unit)
(Main unit)
When performing this operation from the main unit’s panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro Logic or DTS NEO:6.
(Main unit)
Operate the SURROUND BACK button to switch Surround
Back CH ON/OFF.
(Remote control unit)(Main unit)
Light
• Lights when the 6.1 Surround mode is on.
Loading ...
Loading ...
Loading ...