Loading ...
Loading ...
Loading ...
Remote Controller
Mavic Pro
User Manual
40
©
2017 DJI All Rights Reserved.
Linking the Remote Controller
The remote controller is linked to your aircraft before delivery. Linking is only required when using a new
remote controller for the rst time. Follow these steps to link a new remote controller:
1. Turn on the remote controller and connect to the mobile device, and turn on the aircraft. Launch the
DJI GO 4 app.
2. Enter “Camera” and tap on and then tap the “Linking Primary RC” or “Linking Secondary
RC” button to conrm.
Toggle the Control Mode switch to RC mode before linking.
3. The remote controller is ready to link.
4. Locate the linking button on the side of the aircraft, as shown in the gure below. Press the link button
to start linking. The Linking Status Indicator will display a solid green once the remote controller is
successfully linked to the aircraft, and the LCD screen on the remote controller will display the aircraft’s
information.
Link Button
Linking Status Indicator
The remote controller will un-link itself from an aircraft if a new remote controller is linked to the
same aircraft.
In dual remote controller mode, the slave remote controller must be relinked to the aircraft when
the master remote controller has been relinked to the aircraft.
Loading ...
Loading ...
Loading ...