Loading ...
Loading ...
Loading ...
16D-Link DCS-2330L User Manual
Section 2: Installation
Step 1:
Connect the power adapter to a wall outlet or power strip. Power is conrmed
when the Power LED is lit.
Step 2:
You can either connect an Ethernet cable from the camera to your router or use WPS.
If you want to use an Ethernet connection, Carefully remove the rubber seal on
the back of the camera and connect the included Ethernet cable to the Ethernet
port on the camera and connect it to your router.
If you want to use a wireless connection, press and hold the WPS button on the
camera for ve seconds. The WPS status LED will start to blink. Then, press the WPS
button on your Cloud Router within 2 minutes.
Note: The Zero Conguration Setup will only work with a registered D-Link Cloud Router and an active mydlink account.
Zero Conguration Setup
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Conguration. Zero Conguration automatically
congures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to
set up your camera by simply plugging it in and connecting it to your router. Your Cloud Router will automatically assign your
network settings (both wired and wireless) to your camera.
Loading ...
Loading ...
Loading ...