Loading ...
Loading ...
Loading ...
2.5 US oz (75 cm )
9 lbf·ft (12 N·m , 1.2 kgf·m)
(1) oil drain plug
(2) oil filler cap
(3) oil level check bolt
(4) oil level check hole
(1)
(4)
(3)
(2)
REAR
115
Gear Case Oil
Servicing Your Honda
Improper disposal of drained fluids is harmful to the environment.
Park the ATV on level ground.
Place an oil drain pan under the oil drain plug ( ).
Remove the oil filler cap ( ) and the drain plug.
Install the oil filler cap and oil level check bolt.
Remove the oil level check bolt ( ). Make sure the oil level reaches
the oil level check hole ( ).
Fill the gear case with the recommended oil.
Pour the drained oil into a suitable container and dispose of it in an
approved manner (page ).
After the oil has completely drained, reinstall the drain plug and
tighten it to the specified torque:
Check that the drain plug sealing washer is in good condition. If
necessary, replace the sealing washer.
1.
2.
3.
4.
5.
6.
7.
1
2
8.
3
4
182
０９／０５／１１ １４：５９：０２ ３１ＨＰ４８３０ ０１２４
Loading ...
Loading ...
Loading ...