Loading ...
Loading ...
Loading ...
wolfappliance.com
|
7
TRANSITION
For internal blowers, remove the existing 10" (254) round
transition. Refer to the illustration below.
For in-line and remote blowers being discharged from the
front, leave the 10"
(254) round transition in place.
For in-line and remote blowers being discharged from the
rear, remove the 10"
(254) round transition from the front and
solid cover from the rear of the downdraft, then reinstall the
10"
(254) transition on the rear and solid cover on the front.
INSTALLATION
Remove transition.
Installation
DOWNDRAFT
1 Install the top mounting brackets using the #4 sheet
metal screws provided. Refer to the illustration below.
2 Install the lower mounting brackets using the #8 x 32
sheet metal screws provided, but do not tighten. The
brackets will need to be adjusted once the downdraft is
placed in the opening. Refer to the illustration below.
Top mounting bracket.
Bottom leveling bracket.
Loading ...
Loading ...
Loading ...