Loading ...
Loading ...
Loading ...
8
EN
3 Connect and set
up
This section helps you connect this
product to a TV and other devices, and
then set it up.
For information about the basic
connections of this product and
accessories, see the quick start guide.
Note
• For identication and supply ratings,
see the type plate at the back or
bottom of the product.
• Before you make or change any
connections, make sure that all devices
are disconnected from the power
outlet.
Connect the main unit
With the supplied DIN cable, connect the
left base speaker to the right base speaker
as main unit. See the quick start guide for
details.
Charge speakers
If the wireless surround speaker is
undocked from the main unit, its battery
level is indicated by the LED on the
wireless speaker.
• Light up white: full battery or more
than 30% capacity remaining
• Light up red: low battery level, less
than 30% remaining
• Blink red: near empty, less than 10%
remaining
1 Dock the left and right wireless
speakers onto the main unit (the left
and right base speakers) to charge the
speakers.
2 Turn on the main unit.
» During charging, the orange LED
on the wireless speaker lights up.
» When fully charged, the orange
LED on the wireless speaker turns
off.
Note
• It may take around 3 hours to fully
charge the speakers.
Pair up with speakers/
subwoofer
The wireless speakers and subwoofer
automatically pair up with the main unit
(left and right base speakers) for wireless
connection when you turn on the main unit,
the speakers and the subwoofer.
If no audio from the wireless speakers and
subwoofer can be heard, do the following
for pairing.
CSS5235Y_93_UM_V1.0.indb 8 4/24/2015 3:50:56 PM
Loading ...
Loading ...
Loading ...