Loading ...
Loading ...
Loading ...
4
About the controls with temperature settings.
The temperature controls are preset in the factory at 38°F for the refrigerator compartment
and -2°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the
preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary slightly from
the SET temperature based on usage and operating environment.
To change the temperature, press and release the
ADJUST FREEZER or ADJUST REFRIGERATOR pad.
The display will show the actual temperature. To
change the temperature, tap either the ADJUST
FREEZER or ADJUST REFRIGERATOR pad until the
desired temperature is displayed.
Once the desired temperature has been set,
the temperature display will return to the actual
refrigerator and freezer temperatures after 10
seconds. Several adjustments may be required.
Each time you adjust controls, allow 24 hours for the
refrigerator to reach the temperature you have set.
Changing the Temperature
NOTE: The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
Consumer Support
Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions
(Hold 3 sec
to Lock Control)
ICE OFF/
LOCK
(Hold 3 sec
for Turbo Cool)
ADJUST
REFRIGERATOR
Light ON/OFF
(Hold 3 seconds)
ALARM/
LIGHT
(Hold 3 sec
to Reset Filter)
ICE &
WATER
(Hold 3 sec
for Turbo Freeze)
ADJUST
FREEZER
ENERGY
SAVER
TURBO FREEZE
TURBO COOL
RESET FILTER
CUBED CRUSHED
WATER
ICE
OFF
˚
F
38˚ F Recommended
˚
F
-2˚ F Recommended
CLIMATE KEEPER
Loading ...
Loading ...
Loading ...