Loading ...
Loading ...
Loading ...
8 EN
4 Play
5 Listen to the
radio
Play from Bluetooth enabled
devices
Pair and connect a second device
Listen to DAB+ radio
Digital Audio Broadcasting+ (DAB+) is a way of
broadcasting radio digitally through a network
of transmitters. It provides you with more choice,
better sound quality and more information.
• Compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle between the unit and the device can reduce
the operational range.
• The effective operation range between this unit and your
Bluetooth enabled device is approximately 10 meters
(30 feet).
• The unit can memorize up to 8 previously connected
Bluetooth devices.
Note
Note
Note
1. Press to select the Bluetooth source using the
Remote Control.
- [BT] is displayed.
- [BT] on the display ashes.
2. On your device that supports
Advanced Audio Distribution Prole (A2DP),
enable Bluetooth and search for Bluetooth
devices that can be paired (refer to the user
manual of the device).
3. Select “Philips M2505” on your Bluetooth enabled
device and if necessary input '0000' as the paring
password.
• If you fail to search for “Philips M2505” or cannot
pair with this product, press and hold PAIRING for
more than 2 seconds to enter pairing mode.
• After successful pairing and connection, [BT] turn
solid on the display and conrmation sound.
4. Play audio on the connected device.
• Audio streams from your Bluetooth enabled device
to this product.
To disconnect the Bluetooth-enabled device:
• Deactivate Bluetooth on your device.
You can pair and connect a maximum of two
Bluetooth-enabled devices to this product
actively at the same time.
1. In Bluetooth mode, press and hold PAIRING for
more than 2 seconds to enter pairing mode.
2. Connect a second Bluetooth device to this
product.
- The rst connected device also stays connected
to this product.
• To play from the second connected device,
stop music play from the rst device, and then
play music from the second device.
To connect and play from the third Bluetooth-
enabled device
• Press and hold PAIRING for more than 2 seconds to
enter pairing mode.
- The rst connected device or the device with no
music playback is disconnected.
With this product, you can listen to DAB+ radio
and FM radio.
• Position the antenna as far as possible from TV,
or other radiation source.
• For optimal reception, fully extend and adjust
the position of the antenna.
Store DAB+ radio stations automatically
• New stations and services are added in DAB+
broadcast from time to time. To make new DAB+
stations and services available, perform scan
regularly.
1. Press DAB/FM repeatedly to select DAB+ source.
• If you enter DAB+ source for the first time or no DAB+
service is stored, Press [SCAN/OK] key to active the
program mode.
Loading ...
Loading ...
Loading ...