Loading ...
Loading ...
Loading ...
24 EN
Note
• Make sure that all the handsets registered to the
base station are XL490/XL495 in order to have
the ECO+ feature functioning properly.
• When ECO+ is activated, the standby time is
reduced. This is because ECO+ mode the base
station is not transmitting any signal in standby
mode; therefore the handset needs to listen
more frequently for signals from the base station
to detect incoming calls or other requests
from the base station. The time it takes for the
handset to access features like call setup, call log,
paging, and Phonebook browsing is also delayed.
The handset will not alert you to link loss in case
of power loss or moving out of range.
The following table shows you the current status
of the handset screen with different ECO mode
and ECO+ mode settings.
ECO
mode
ECO+
mode
Handset icon display
[Off] [Off] and are off.
[Off] [On] is displayed only after
the ECO+ mode is activated
during standby mode.
[On] [Off] is displayed.
[On] [On] is displayed and changed
to when the ECO+ mode
is activated in standby mode.
Name the handset
The name of the handset can be up to 14
characters. It is displayed on the handset screen
in standby mode.
1
Select [Menu] > [Phone setup] > [Phone
name], then press [OK] to confirm.
2
Enter or edit the name. To erase a
character, select [Clear].
3
Press [OK] to confirm.
The setting is saved.
Set the date and time
For information, see Set the date and time (see
Set the date and time on page 9).
Set the display language
Note
• This feature only applies to models with multiple-
language support.
• Languages available vary from country to
country.
1
Select [Menu] > [Phone setup] >
[Language], then press [OK] to confirm.
2
Select a language, then press [OK] to
confirm.
The setting is saved.
Auto answer
When you activate the auto answer feature, you
can connect to the incoming call automatically
once you pick up the handset. When you
deactivate this feature, you have to press or
to answer the incoming call.
1
Select [Menu] > [Phone setup] > [Auto
answer], then select [OK] to confirm.
2
Select [On]/[Off], and select [OK] to
confirm.
The setting is saved.
Loading ...
Loading ...
Loading ...