Loading ...
Loading ...
Loading ...
35
Troubleshooting
Problem Possible cause Possible solution
The dishes are not
clean.
Filters are clogged. Clean the filters.
Filters are not correctly
assembled and installed.
Make sure that the filters
are correctly assembled and
installed.
Spray arms are clogged.
Remove remaining food
remnants with a thin pointed
object.
Programme was not
applicable for the type of load
and food remnants.
Make sure that the
programme is applicable for
the type of load and food
remnants.
Incorrect position of the items
in the baskets. Water could
not wash all items.
Make sure that the position
of the items in the baskets is
correct and that the water can
easily wash all items.
Spray arms could not turn
freely.
Make sure that the position
of the items in the baskets is
correct and does not cause
the blockage of the spray
arms.
No detergent or insufficient
quantity of detergent in the
detergent dispenser.
Make sure that you add the
correct quantity detergent in
the dispenser before you start
a programme.
The wash cycle was
interrupted by a long break.
Do not open the door or cut
power supply during the wash
cycle.
Whitish streaks,
stains or bluish
layers on glasses
and dishes.
Released quantity of rinse aid
is too much.
Decrease the released
quantity of rinse aid.
Quantity of detergent was too
much.
Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.
Multitab detergent tablets
used with a short programme
might not fully dissolve.
Select a longer programme
when using Multitab detergent
tablets.
Washing Results are not satisfactory
Loading ...
Loading ...
Loading ...