Loading ...
Loading ...
Loading ...
iBN10
Using the
8
Using Bluetooth:
Pairing Your Device Manually
NOTE: See the iBN10 Bluetooth Connection Guide for complete pairing details.
The first time the unit is plugged in, it will enter auto-pairing mode. Otherwise, follow steps below to pair.
1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s
user manual.
2. Press and hold the Power/Pairing Button located on top of the unit for 3 seconds. The unit will turn
on and enter pairing mode, a beep will sound, the Bluetooth icon on the display will flash and the
status indicator ring will “spin” while the unit attempts to pair. “iHome iBN10” should appear on your
device’s menu. If “Not Paired, “Not Connected” or similar message appears, select “iHome iBN10”
on the device to begin/complete pairing. If your device asks for a password, enter 1234 on the
keyboard of your device. If no device is paired within 2 minutes, a long beep will sound and the unit
will revert to its previous state. To retry pairing, follow steps 1 – 2.
3.
Once paired with a device, the Bluetooth icon will stop flashing and remain on the display and two
confirmation beeps will sound. There should be an indication on your device that pairing is complete.
On some devices, you must then select “Use as Audio Device (stereo)” or similar on the device’s
Bluetooth menu. Once paired, your device should link to the iBN10 whenever within range (about 33
feet).
P12
Loading ...
Loading ...
Loading ...