Loading ...
Loading ...
Loading ...
3
Recommended Tools
Utility Knife (To cut packaging and banding)
Ratchet with 9/16" and 3/4" Sockets
9/16" and 3/4" Combination Wrenches
Adjustable Wrench
Rubber Mallet
Assemble Main Frame
NOTE: Before installing the plastic parts, please allow them
to acclimate to room temperature or they may be damaged.
CAREFULLY install all plastic components with Rubber Mallet.
NOTE: If you have purchased
F615 Hold Down Kit, please
skip the step below and refer
to the F615 manual.
PLEASE REFER TO THE EXPLODED VIEW ON THE PAGE 6 FOR ASSEMBLY.
1. Attach Rear Stabilizer (2) to the
Main Frame (1) using two 1/2" X
4" Hex Bolts (21), four 1/2"
Washers (25), and two 1/2" Nylon
Nuts (27). Tighten bolts.
2. Bolt Handle Bar (5) to the Main
Frame (1) using two 1/2" X 3" Hex
Bolts (22), four 1/2" Washers (25),
and two 1/2" Nylon Nuts (27).
Tighten bolts.
1
2
27
25
27
25
21
25
21
25
A1
1
5
27
25
25
22
25
25
22
A2
Loading ...
Loading ...
Loading ...