Loading ...
Loading ...
Loading ...
Editing Recorded MDs
lename[E:\SEM_Janet\Revision
D
ata\J9050000_4238553141MDSJE480CEL\4238553141\GB05OPE-CEL.fm]
model name1[MDS-JE480]
[4-238-553-14(1)]
masterpage:Left
(3 column)
23
GB
3 Turn AMS (or press ./>
repeatedly) until the number of the track
(when erasing the track name) or “Disc”
(when erasing the disc name) flashes,
then press PUSH ENTER or YES.
“Complete!” appears.
You can change the volume of recorded tracks
using S.F (Scale Factor) Edit. The original track
is recorded over at the new recording level.
When changing the recording level, you can
select Fade-in Recording to gradually increase
the signal level at the start of recording, or
Fade-out Recording to gradually decrease the
signal level at the end of recording.
Changing the overall
recording level
1 While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./>
repeatedly) until “S.F Edit?” appears,
then press PUSH ENTER or YES.
3 Turn AMS (or press ./>
repeatedly) until “Tr Level?” appears,
then press PUSH ENTER or YES.
4 Turn AMS (or press ./>
repeatedly) until the track number you
want to change the recording level
appears, then press PUSH ENTER or
YES.
5 While monitoring the sound, turn AMS
(or press ./> repeatedly) to
change the recorded level without
turning on the “OVER” indicators on the
peak level meters.
6 Press PUSH ENTER or YES.
“(S.F) Edit OK?” appears in the display.
7 Press PUSH ENTER or YES again.
The deck starts recording over the existing
track. “S.F Edit(:) ** %” appears while the
track is being recorded. When recording
over the track, the amount of time required
is roughly equal to or longer than the
playback time of the track. When the
recording finishes, “Complete!” appears.
Fade-in and Fade-out
Recording
1 While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./>
repeatedly) until “S.F Edit?” appears,
then press PUSH ENTER or YES.
3 Turn AMS (or press ./>
repeatedly) until “Fade In?” or “Fade
Out?” appears, then press PUSH
ENTER or YES.
4 Turn AMS (or press ./>
repeatedly) until the track number you
want to change the recording level
appears, then press PUSH ENTER or
YES.
“Time 5.0s” appears in the display.
5 While monitoring the sound, turn AMS
(or press ./> repeatedly) to
change the Fade-in or Fade-out
Recording time.
The deck plays the portion that will be
recorded over using Fade-in or Fade-out
Recording.
You can set the time at any value between
1 second and 15 seconds, in 0.1 second
increments. You cannot set the time longer
than the track.
6 Press PUSH ENTER or YES.
“(S.F) Edit OK?” appears in the display.
7 Press PUSH ENTER or YES again.
The deck starts recording over the existing
track. “S.F Edit(:) ** %” appears while the
track is being recorded. When the recording
finishes, “Complete!” appears.
Changing the recorded
level after recording
— S.F EDIT
Avoid turning on these indicators
continued
GB02REG-CEL.book Page 23 Wednesday, July 13, 2005 2:56 PM
Loading ...
Loading ...
Loading ...