Loading ...
Loading ...
Loading ...
Audio - Auto On
Select the Audio Auto On mode you would like to use,
either ON or OFF.
Audio Auto On - ON
When the Audio Auto On switch is in the ON position
the amplifier will power o after 15 minutes without
an audio signal present on any of the channels. When
an audio signal is applied the amplifier will take
approximately 9-12 seconds to reproduce audio after
going through its power up sequence.
NOTE: THE AUDIO AUTO ON - ON MODE USES
THE LEAST AMOUNT OF AC POWER WHEN THE
AMPLIFIER IS NOT OPERATING.
Audio Auto On - OFF
When the Audio Auto On switch is in the OFF position
the amplifier will enter Sleep Mode after 15 minutes
without an audio signal present on any of the channels.
When an audio signal is applied the amplifier will take
approximately 2-3 seconds to reproduce audio.
Apply DSP Preset
The SR 2-125 amplifier includes pre-programmed
DSP presets. These presets are selected utilizing first
the EQ Preset Bank dial, followed by the EQ Preset
Selection dial (see included DSP Preset Matrix).
The first EQ in any bank will be Flat. To select the
appropriate preset for your environment please see
the included DSP preset Selection Matrix.
QUICK SETUP PAGE
FIGURE 17: SR 2-125 EQ PRESET BANK & EQ PRESET SELECTION
FIGURE 16: SR 2-125
AUDIO AUTO ON - OFF
FIGURE 15: SR 2-125
AUDIO AUTO ON - ON
TECHNICAL ASSISTANCE
AND SERVICE
The Technical Assistance Department at Sonance is
available at (949) 492-7777 to answer any questions
concerning the operation and installation of your
speakers between the hours of 7:00 AM and 5:00 PM
Pacific time, Monday through Friday, except holidays.
In the event your unit should need repair or service, you
may return the unit to your authorized dealer or use the
following guidelines:
PLEASE KEEP ORIGINAL PACKAGING WHEN POSSIBLE.
1. Be prepared to state the model number and / or
serial number, date of purchase, and dealer’s name
and address when calling.
2. Contact Sonance directly at (949) 492-7777
or at www.sonance.com. YOU MUST HAVE PRIOR
AUTHORIZATION TO RETURN YOUR UNIT.
3. If you are returning the product directly to Sonance,
call us to obtain a return authorization number
before shipping.
4. Ship the product via United Parcel Service, Federal
Express, or other package delivery service. Please do
not use the U.S. Postal Service.
5. Include the return authorization number on the
shipping label.
6. Ship to:
Attn: Quality Assurance Department,
RMA#(include RMA number here)
Sonance
11016 Mulberry Ave.
Suite B
Fontana, CA 92337
10
Loading ...
Loading ...