Loading ...
Loading ...
Loading ...
Pour 2 cups of RV type Antifreeze in soap dispenser.
on knob
Shut off water at both faucets and disconnect water inlet hoses from faucets and drain
Make sure that your machine was installed according to the correct installation procedures mentioned
in this Manual.
- Press release lever on the inside of the drawer and pull it out. (Fig. 14)
- Remove the cap from the Fabric Softener compartment.
- Wash all of the parts under running water.
- Clean the drawer recess with a small brush. (Fig.15, Fig.16)
- Reinsert the cap (Pushing it firmly into place).
- Push the drawer back into place.
- Run a rinse program without any laundry in the drum.
- Switch off the Washer
- Open the service flap. (bottom right corner)(Fig.11)
- Carefully unscrew the coin-trap cover. Warning: Some residual water will flow out. (Approx. 1 Cup)[Fig.12]
- Remove foreign objects/fluff from inside and clean the interior. (Fig.13)
- The pump impeller wheel located behind the water filter, must be able to rotate.
Remove detergent residue and fluff from the pump cover thread and pump housing.
- Insert the coin-trap cover and screw tight.
- Insert and close the service flap.
Loading ...
Loading ...
Loading ...