Loading ...
Loading ...
Loading ...
2-19
E
EJU00698b
Multifunction meter
This meter contains following functions for
help and convenience in operating the
watercraft.
1
“MODE” button
2
“SET” button
3
“CODE” setting buttons
4
Tachometer
5
Speedometer
6
Fuel meter
7
Engine oil meter
8
Display for Clock, Hour meter, Trip meter and
Trip timer
9
Warning light
0
Display for PADLOC and direction of warning
indicator
A
Battery warning indicator
B
Overheat warning indicator
C
Fuel warning indicator
D
Oil warning indicator
CAUTION:
● Do not run the engine at full throttle or
more than 15 seconds to check the
meter for operation on land. The
engine could overheat.
● Use the specified resistor-type spark
plugs and caps, otherwise the meter
may function erratically.
N
O
TE:
The demonstration mode display starts
showing after the engine starts. Then all dis-
plays light up and the buzzer sounds twice.
The meter will operate normally after a few
seconds. The current display will continue to
operate for 30 seconds after the engine
stops.
E_F0P11-2.fm Page 19 Wednesday, June 28, 2000 3:44 PM
Loading ...
Loading ...
Loading ...