Loading ...
Loading ...
Loading ...
8-20
Driving tips
1) Crossbar end support
2) T-30 torx® head screw
1. Before placing the crossbar on the roof rails, make
sure that the T-30 torx® head screw is fully loosened
from each end support.
2. Spread the inner clamp and the end support as far
apart as possible.
1) Load label
2) Direction arrow label
3. With the front direction arrow label on the top right
side of the crossbar pointing toward the front of the ve-
hicle, carefully place the crossbar across the top of the
vehicle so that the crossbar end supports rest on the
top of the roof rails approximately 6 inches (150 mm)
rearward in the front radius of the roof rail.
4. Move the end support and inner clamp to hook un-
der the end of the roof rail on both sides and loosely
assemble the T-30 torx® head screw with the tool pro-
vided into the threaded insert in the inner clamp on
each end of the crossbar.
1
2
HS8028BB
FR
FR
ONT
ONT
MAXIMUM LOAD 100 LBS. EVENLY DISTRIBUTED
1
2
6 in
(150 mm)
HS8026BB
Loading ...
Loading ...
Loading ...